MAX6762TATAD0+T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	20 µs Typical
Voltage - Threshold:	3.3V, Adj
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-WDFN Exposed Pad
Supplier Device Package:	8-TDFN (3x3)
Base Part Number:	MAX6762

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX6762TATAD0+T is a low-power supervisor with push-pull output logic that is designed to monitor single- or dual-supply voltage rails. The device operates over a wide temperature range of -40°C to +85°C and provides an accurate reset threshold. It has a reset delay time of 11ms with a reset pulse width of 40µs. In addition, it has an active-low push-pull reset output to ensure proper circuit initialization and sequence.The MAX6762TATAD0+T monitors power outages, undervoltages, overvoltages, and brownouts. It is available in an 8-bump chip-scale package, and it provides an economical solution for system supervisors when board space is tight. This device is used in many applications such as:• Automotive• Industrial Process Control• Instrumentation• Video/Audio• Networking and Telecom• Computers and Peripherals• Test and Measurement EquipmentThe MAX6762TATAD0+T applications include reset generator, Volt-Ohm-Meter (VOM) readout circuit, signal power supply reset circuit, and system monitor. It also has a dedicated IRIGB charge-pump input that enables the device to control the reset timers and pulses according to a designated IRIGB signal.The MAX6762TATAD0+T works in two stages — voltage monitoring and timer. The voltage monitoring stage checks the power supply voltage and compares it with the user defined-threshold using an Accurate-on-chip Bandgap Comparator. If the voltage exceeds the set threshold, then the device goes into the timer stage.The device has a debouncing period of 6ms during which the power supply voltage is monitored. If the voltage remains within specified limits during the debouncing period, then the device will reset, and no reset signal will be generated. However, if the voltage exceeds the limits, then the device will go into the timer stage and generate a reset pulse. The reset pulse has a pulse width of 40µs and a reset delay time of 11ms.The device is also configured to detect a manual reset signal. A manual reset signal can be activated by pressing the reset button. When the button is pressed, the device will reset, regardless of the power supply voltage.In conclusion, the MAX6762TATAD0+T is a low-power supervisor with push-pull output logic designed to monitor single- or dual-supply voltage rails, and it is suitable for use in a number of applications from automotive to networking and telecom. It works in two stages — voltage monitoring and timer, and it has a reset pulse width of 40µs and a reset delay time of 11ms. In addition, it has an IRIGB charge-pump input for controlling the reset timers and pulses according to a designated IRIGB signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description