MAX6865UK18D4S+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX6865UK18D4S+T is a PMIC - Supervisor Integrated Circuit (IC) that helps to manage power supply and electronic circuits to ensure that their output is stable over a range of input and load conditions. It is a part of the MAX family of Supervisors from Maxim Integrated and is based on their patented Multi-Rail Technology, which provides the system power supply protection, power sequencing, and reset features. The MAX6865UK18D4S+T is optimized for use in industrial and consumer applications, where power management is critical.

The MAX6865UK18D4S+T comes in a 6-pin, SOT-23 package and is rated for a worst case operating temperature range of -40°C to +125°C, allowing it to be used in a wide variety of applications. Its low power consumption makes it suitable for use in portable applications, and its low quiescent current makes it an ideal choice for extended battery life applications. It also offers improved ESD performance over from previous versions.

The MAX6865UK18D4S+T is powered by a 1.8V internal regulator that powers both the supervisor and the output voltage. This regulator is capable of delivering up to 2A of load current and is designed to be used with one or two input voltage rails. Its adjustable error amplifier has an input offset voltage of 0.3V and is capable of powering up to four external devices. It also features an I2C/SPI interface, allowing the user to control various parameters, such as the power-on reset delay and the output voltage, from an external device.

The MAX6865UK18D4S+T is a power monitor IC with an integrated voltage monitor, watchdog timer, soft start, and brown-out circuit. The onboard voltage monitor allows the user to program the target voltage level and delay time of the system. When input power falls below or rises above the programmed levels, the voltage monitor will trip, triggering an active reset signal. This resets the system and prevents any abnormal operation.

The watch dog timer is used to detect any system errors not detected by the voltage monitor. The watchdog timer can be set at any duration, from 1.2ms to 16 seconds. If errors are detected, the watchdog timer will send out a reset pulse after the set time has elapsed.

The soft start circuit is designed to prevent large inrush currents that could overload the system. When power is applied, the soft start circuit gradually increases the output voltage, providing a safe and reliable power supply. The brown-out circuit prevents any abnormal operation during power cycles. If the input voltage drops below a certain threshold, the brown-out circuit will force the system to reset and delay power-up until the voltage rises above the threshold.

The MAX6865UK18D4S+T is a powerful and highly integrated power management IC that can be used in a variety of applications. Its Multi-Rail Technology, low power consumption, and low quiescent current make it a great choice for power management in portable, industrial, and consumer applications. It can also act as a watchdog for systems with internal or external errors, and provides the system with soft start and brown-out protection.

The specific data is subject to PDF, and the above content is for reference