MAX6888OETE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Today, the power management IC (PMIC) industry has gone through many years of development and exploration. Among these, one of the highly acclaimed solutions is the MAX6888OETE+T device. This application field and working principle of the device can be briefly summarized as follows:

1. MAX688OETE+T Application Field

The MAX688OETE+T device is a micro power management IC, which is mainly used for power supplies/regulators, LED lighting systems, as well as for LCD panels. With advanced integration and high accuracy, this device can support a wide range of features, such as over current protection, under voltage lockout and over voltage protection. In addition, this device supports low output voltage operation and low quiescent current, which makes it suitable for use in low power systems.

2. Working Principle of MAX688OETE+T

The working principle of MAX688OETE+T is to monitor the power supply voltage and switch the output voltage of the regulator. This voltage monitoring feature is possible thanks to the device’s built-in comparator, which will adjust the output voltage automatically based on the voltage reading from the voltage input terminal.When the voltage input is set higher than the reference voltage, the comparator will detect the exceeding voltage and turn on the regulator output. Similarly, when the voltage measured at the voltage input terminal is lower than the reference voltage, the comparator will recognize that and turn off the output of the regulator.In addition, in order to ensure the accuracy and consistency of performance, MAX688OETE+T also incorporates an Internal Current Limit Comparator (ICLC) to prevent excessive current from flowing through the circuit. This ICLC will be activated when the current limit voltage is exceeded, and will immediately reduce the output voltage until the current flow goes back to the allowable limit.Finally, the over-voltage protection feature of the MAX688OETE+T can be easily configured by setting the acceptable voltage levels in the OVP register. Once the voltage reaches the OVP level, the IC will shut down the output and protect the components downstream.

Conclusion

To sum up, the MAX688OETE+T is a highly reliable power management IC, which is mainly used in power supplies/regulators and LED lighting systems. This device can be easily configured to monitor the input voltage and switching the output voltage, as well as providing over-voltage protection to the circuit. Thus, this device can be a preferred choice for designers when seeking for high accuracy and performance for low power systems.

The specific data is subject to PDF, and the above content is for reference