MAX7037EGL+ RF/IF and RFID

Power - Output:	6dBm
Package / Case:	40-VFQFN Exposed Pad
Operating Temperature:	-40°C ~ 85°C
Current - Transmitting:	16mA
Current - Receiving:	22mA
Voltage - Supply:	3.3V
GPIO:	16
Serial Interfaces:	SPI, UART
Memory Size:	64kB Flash
Sensitivity:	-100dBm
Series:	--
Data Rate (Max):	--
Frequency:	315MHz, 433MHz, 868MHz, 915MHz
Modulation:	ASK, FSK
Protocol:	--
RF Family/Standard:	General ISM
Type:	TxRx + MCU
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver ICs

The need for communications consistently drives the technology and development of integrated circuits (ICs). Radio-frequency (RF) transceiver ICs are widely used in a variety of applications, including wireless data transmission and cellular communication. An RF transceiver IC operates by both sending and receiving signals. One such device is the MAX7037EGL+ transceiver, an effective solution for applications such as radio frequency identification (RFID) and security systems.

MAX7037EGL+ Applications

The MAX7037EGL+ is a dual-band, highly integrated, low-power transceiver IC. It is ideal for RFID applications, as it features low-noise RF receiver and transmitter cores operating in the 300 to 960 MHz frequency range. The combination of its RF and digital functions makes it particularly suitable for secure storage in key fobs and authentication tags. The IC can support transmit power up to +14 dBm, allowing for a maximum communication distance of up to 10 meters.The MAX7037EGL+ provides several advanced features, including a digital controller/processor with ROM, RAM, and ports, as well as several serial communication interfaces. It also features an on-off-calibration (OOC) phase-locked loop (PLL), allowing it to operate over a wide temperature range. This RF transceiver IC is available in a 4x4mm, 0.8mm-pitch, 48-pin QFN package, making it suitable for space-constrained applications.

MAX7037EGL+ Working Principle

The MAX7037EGL+ is designed to provide reliable high-speed data transmission and low power consumption at all times. It has a sophisticated receiver and transmitter design that allows it to achieve comparable performance with other RF transceiver ICs. The receiver works by converting the incoming RF signal to an intermediate frequency, then digitally processing the derived data and control signals. User-programmable control logic is implemented in a dedicated programmable logic engine (PLE) for improved flexibility.The transmitter works by generating a modulated RF signal at the exact frequency of the transmitted data. This modulated signal is then amplified, filtered, and combined with the control signals before being transmitted. This allows the MAX7037EGL+ to produce a symmetric, low-error signal that can even penetrate thick walls and other obstacles. The high level of integration and wide operating temperature range make this transceiver IC well suited for many commercial, industrial, and automotive applications.

Conclusion

The MAX7037EGL+ is an ideal choice for wireless applications demanding reliable high-speed data transmission and low-power design. Its features provide a distinct advantage over other RF transceiver ICs, as it is capable of transmitting and receiving signals in two frequency bands with an OOC PLL operating over a wide temperature range. The high level of integration and slim QFN package make the MAX7037EGL+ an ideal solution for applications such as RFID and automotive communication.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description