MBR30100CTHC0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MBR30100CTHC0G diode rectifier array is a three-phase, full-bridge type rectifier with a high-efficiency Schottky diode. Its combination of robust load current, low on-state resistance, low profile, and its short reverse-recovery time has made it suitable for a variety of applications. This article will detail the application fields as well as the working principle of the MBR30100CTHC0G.

Application Fields

The MBR30100CTHC0G is commonly used as a bridge rectifier for purposes of converting alternating current (AC) sources from a grid, generator, or any other type of AC source into a direct current (DC) output. It can also be used to isolate low-power AC networks from higher power AC networks. In addition to this, it is also useful for protection in high-current DC power supply systems, especially high-frequency power supplies or other AC/DC switching power supplies. Its capabilities of handling short-circuit, over-current and over-voltage protection make it an ideal candidate for such applications.

The MBR30100CTHC0G also finds application in solar photovoltaic (PV) systems, UPS systems, and renewable energy systems. In PV systems, the bridge rectifier is used to convert the AC current from the solar panel into DC current in order to power other components of the system. This type of rectifier is well-suited for UPS systems too, as it can handle the peak currents associated with UPS when power is switched over from AC source to DC source. Moreover, the bridge rectifier is an important component that is used in renewable energy systems as it allows for integration of solar energy into a conventional AC network.

Working Principle

A diode rectifier array, such as the MBR30100CTHC0G, works by allowing current to flow through the device in one direction only. This allows AC sources to be converted into DC sources. The rectifier is made up of six individual diodes, each of which is connected in series between the input and output terminals of the rectifier. When the input AC voltage reaches a certain level (known as the forward voltage of the diode), the diodes become “forward biased”, allowing current to flow through the diode. Current flows through the diode in only one direction, which prevents current from flowing backwards. This prevents unwanted current from entering the system, such as through a short-circuit, and limits the maximum current that can flow through the diode.

The bridge rectifier also works in a similar fashion, however instead of using one diode, it uses 4, arranged in what is called a “Half-Wave Bridge”. This arrangement allows current to flow in two directions, via two of the diodes, and prevents current from flowing back through the other two, thus acting as a “push-pull” mechanism. The result is a full-wave rectification of the input AC power, which changes the current from an AC source to a DC source.

The MBR30100CTHC0G also features a high-efficiency Schottky diode, which has a significantly lower forward voltage than a standard diode, and a much shorter reverse-recovery time (the time it takes for the diode to reverse its current flow after being forward biased). This makes it an ideal choice for applications where fast power switching is required, such as in dc-ac inverters and solar panel array systems.

The MBR30100CTHC0G diode rectifier array is designed for applications where fast power switching and high switching speed are required. It is a versatile option and can be used in a variety of applications, such as solar photovoltaic systems, UPS systems and other renewable energy systems. The advanced design of the MBR30100CTHC0G allows for a reliable and robust circuit, capable of handling short circuit, over-current, and over-voltage protection in your DC power supply system.

The specific data is subject to PDF, and the above content is for reference