MBR80100R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MBR80100R rectifier diode is commonly used in power supplies and other applications that require reliable high current output. The device is available in both surface mount and through-hole packages, and is capable of handling currents up to 100 amperes at voltages up to 800 volts. The device offers excellent reverse recovery time and low forward voltage drop, making it ideal for a wide range of applications.

The primary purpose of this rectifier diode is to convert AC power, typically from a commercial source, into DC power. It does this by effectively allowing current to flow in only one direction – from the positive to the negative terminal. As such, it is often referred to as an one-way valve. Prior to the diode, the AC power is often filtered or rectified into a low-ripple DC signal, which is then sent to the diode to be converted into the required output voltage and current.

When the device is connected in reverse bias, it acts as an insulating barrier and does not allow current to flow through it. In forward bias, it allows current to flow, but also acts as a resistor, limiting the current through it. Therefore, this device has two separate roles – acting as an insulator in reverse bias, and as a resistor in forward bias.

The device is typically used in high-power applications such as photovoltaic systems, where it is used to convert the varying AC solar input into a constant DC current. Other applications include consumer electronics, battery chargers, UPS systems, and even power supplies used in industry. It has the unique ability to provide the required current while still operating safely and within the specified limits.

The MBR80100R rectifier diode is constructed from a single piece of semiconductor material. It has a metal coating on one side, which acts as the anode, and a metal patch on the other side, which acts as the cathode. The metal patch is made from a conductive material, such as copper or tin, which allows current to pass through it easily. The semiconductor material between the anode and cathode serves to provide the level of rectification desired.

The working principle of this diode is based on the fact that electrons in a conductor form an electric field when an electric potential is applied to the ends. If a small amount of voltage is applied to the two ends of the semiconductor material, the electrons are attracted to the positive end and flow away from the negative end. This creates a potential difference between the two ends, and current can flow through the material in a controlled manner. This current can then be used to generate electrical power, allowing the device to act as a converter.

The MBR80100R rectifier diode is a reliable and effective way to convert AC input into DC output, making it a popular choice for many power supply applications. Its ability to provide considerable current while still maintaining safety makes it ideal for use in high power applications, such as photovoltaic systems.

The specific data is subject to PDF, and the above content is for reference