MBRF20020R

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Configuration:	1 Pair Common Anode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	150V
Current - Average Rectified (Io) (per Diode):	100A
Voltage - Forward (Vf) (Max) @ If:	880mV @ 100A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 150V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Chassis Mount
Package / Case:	TO-244AB
Supplier Device Package:	TO-244AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MBRF20020R Application Field and Working Principle

The MBRF20020R is a type of diode rectifiers array. It is generally used for the purpose of providing rectification of the current required by certain systems. This type of diode rectifier is more efficient than the more commonly used bridge rectifier because of its reduced number of components and its capability of controlling leakage current.

What is a Diode Rectifiers Array?

A diode rectifiers array is a type of circuit which contains two or more individual diodes in order to provide rectification of the input current required by the said system. The circuit provides alternating current in the form of a sine wave, and the diodes then take this input waveform and convert it into a pulsed DC waveform.

Components of MBRF20020R

The MBRF20020R diode rectifiers array consists of a total of eight individual rectifiers. Each of these eight diodes have anode and cathode terminals, along with a \'set\' terminal that allows the user to control the voltage by adjusting the set terminal.

Features of MBRF20020R

The MBRF20020R diode rectifiers array contains very low on-state resistance, which allows it to handle higher power outputs. It is also a very fast system, with a typical switching frequency of up to 10MHz. Additionally, these rectifiers boasts an extremely low forward voltage drop and an almost non-existent reverse voltage drop, making it suitable for use with high power systems.

Application of MBRF20020R

The MBRF20020R diode rectifiers array is mostly used in synchronous rectification and power factor correction circuits. It is also used in motor control systems and power inverters, as well as in AC/DC and DC/DC converters. Additionally, these diode rectifiers array can also be used in telecommunication equipment, solar power supplies, and LED drivers.

Working Principle

The MBRF20020R diode rectifiers array works on the same principle as any other rectifier circuit. When an alternating current voltage is applied, the diodes within the rectifiers will switch on and off depending on the alternating current waveform. This causes the alternating current to be converted into direct current. When the diodes switch off, the MBRF20020R circuit also acts to prevent leakage current, thus reducing its power loss.

Conclusion

The MBRF20020R diode rectifiers array is a convenient and efficient way of providing rectification and power factor correction in many applications. It offers very low on-state resistance, fast switching frequency and low power losses, as well as good temperature stability and reverse voltage protection. The MBRF20020R is a very reliable and cost-effective device that has widespread applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description