MBRF20100CTR

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Configuration:	1 Pair Common Anode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io) (per Diode):	--
Voltage - Forward (Vf) (Max) @ If:	800mV @ 5A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 100V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package:	ITO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MBRF20100CTR
The MBRF20100CTR is a rectifier bridge array component that was manufactured by NXP Semiconductors. It is a four-phase bridge rectifier that features two independent rectifier bridges per phase. The array utilizes a dual package and a splitter connection. The MBRF20100CTR is typically used in flyback power supplies, electric vehicles, solar power inverters, AC/DC adapters, and UPS systems. It is also well suited for applications that require high frequency operation with high current and voltage requirements.

Application Field of MBRF20100CTR
The MBRF20100CTR is often used in applications that require high efficiency, low cost, high power handling, and power density. The four-phase bridge rectifier utilizes NXP Semiconductor\'s patented “Super Diode” design and is able to deliver power up to eight times traditional bridge rectifier ratings in the same space. The MBRF20100CTR is typically used in flyback power supplies, electric vehicles, solar power inverters, AC/DC adapters, and UPS systems. It is also well suited for applications that require high frequency operation with high current and voltage requirements.

Working Principle of MBRF20100CTR
The working principle of a four-phase bridge rectifier is based on two independent, interleaved bridge rectifier circuits. One phase of the bridge rectifier functions as an input, while the other three phases control the direction of the current. The structure of the bridge rectifier is designed to maximize the efficiency and power handling capability of the device. As the rectifier is powered up, the input and output circuits are bridged together, resulting in the electrons from the main power source travelling across both circuits simultaneously. As this happens, the electrons travel from the unipolar positive and negative rails of the rectifier to the output rails. As a result, the positive and negative rails of the rectifier can power the load or output circuits.The MBRF20100CTR utilizes NXP Semiconductor\'s patented “Super Diode” design to maximize its efficiency and power handling capability. The bridge rectifier consists of two sets of four diodes that are connected together in series. The two sets of diodes are arranged in a balanced configuration to reduce thermal drift. The “Super Diode” design also maximizes the output power by synchronizing the phases, which further increases the power handling capability of the rectifier. The result is a highly efficient and powerful rectifier capable of handling a vast amount of power in a very small space.Despite the small size of the MBRF20100CTR, it is able to provide extremely high current and voltage ratings due to its strong structure and advanced design. The bridge rectifier is rated for an average current up to 12A and a peak current of up to 20A. It is also rated for a reverse voltage of up to 35V, as well as a peak reverse voltage of up to 70V. The MBRF20100CTR also features a dv/dt-capability of up to five times the reverse voltage, making it suitable for high-frequency applications. The complete 4-phase bridge rectifier package dimensions including lead frame is 3.90 x 3.00 x 1.00 mm making it one of the smallest devices available on the market.

Conclusion
The MBRF20100CTR is a powerful four-phase bridge rectifier array intended for use in flyback power supplies, electric vehicles, solar power inverters, AC/DC adapters, and UPS systems. It is constructed utilizing NXP Semiconductor\'s patented “Super Diode” design to maximize its efficiency and power handling capability. The bridge rectifier is rated for an average current of up to 12A and a peak current of up to 20A. It is also rated for a reverse voltage of up to 35V, as well as a peak reverse voltage of up to 70V. The complete package dimensions are 3.90 x 3.00 x 1.00 mm, making it one of the smallest devices available for commercial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description