MBRT400100

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io) (per Diode):	400A (DC)
Voltage - Forward (Vf) (Max) @ If:	880mV @ 200A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 20V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Chassis Mount
Package / Case:	Three Tower
Supplier Device Package:	Three Tower

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MBRT400100 Application Field and Working Principle of Rectifier Arrays

MBRT400100 rectifier arrays are used in almost all electronics applications, from small-scale consumer electronics to large industrial equipment. These types of rectifiers are composed of at least two diodes connected in series with each other to create a single rectification path for the current. The various components used in the building of a rectifier array depends on the voltage and current ratings required.In an array, the two diodes are usually connected in parallel to each other. This configuration allows them to share the voltage and current between them, allowing them to withstand higher currents than a single diode. The rectifier array is then connected to a power source and the current is allowed to flow through it.The diodes must have the appropriate voltage ratings to withstand the incoming voltage, and the current ratings must be appropriately adjusted to the expected current. If the diodes have too high of a rating, they may become damaged and if they have too low of a rating, they may not be able to handle the current.When the current is flowing through the diodes, it is passed through the rectifier array to create an alternating current in the circuit. This creates a voltage swing between high and low points in the circuit. During the course of the signal, the voltage and current alternates between high and low, creating an alternating output signal.Rectifier arrays are commonly used in a variety of applications. In power supplies and medical equipment, for instance, rectifier arrays are used to convert alternating current (AC) to direct current (DC). In LCD displays, the rectifiers are used to convert AC to DC in order to power the display.In circuit design, one of the most popular uses of the MBRT400100 rectifier arrays is as a tool to create a resistive element. A resistive element is used to control the current flowing through a circuit and its resistance is determined by the size of the MBRT400100 array. By increasing the number of diodes in the array, the resistance is increased further and the current must be reduced further.It is also important to note that the rectifiers can be used in high-power or low-power circuits. High power should be avoided in rectifiers as they can cause arcing or other dangerous conditions if they are not used properly. Low power circuits such as those used in LCD displays should be used only with low voltage rectifiers as the higher voltage can damage the circuit.In summary, the MBRT400100 rectifier array is a popular tool for many applications and has been used for many years in the electronics industry. By connecting two or more diodes in parallel and connecting them to a power source, an alternating output signal can be created from the alternating current. This signal can be used for controlling, regulating, or powering electronics. Rectifier arrays are also used for creating resistive elements in a circuit, allowing for more control and stability of the current. Although high-power applications should be avoided with these types of rectifiers, they are still used in many types of industrial and consumer electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description