MC100EL33DTR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC100EL33DTR2G is a high-speed, low-power, dual D-type flip-flop device designed for low-voltage monolithic three-state applications. It offers excellent switching characteristics an ultra-low power consumption. The device is compatible with a variety of logic families, such as LVTTL, SSTL-II, LVDS, CML and HSTL. It features a 50% power reduction compared to traditional CMOS devices and is the ideal choice for low-power applications.

Application Field

The MC100EL33DTR2G is suitable for a variety of logic applications, such as sequential logic, data transfer, and flip-flop operations. It is a low-power consumption solution for clock dividers and counters, such as frequency divider, PLL divider, and edge detector. Specifically, the high-speed and low-power characteristics make this device perfect for applications such as peripheral interface controllers, automotive in-vehicle-infotainment systems, and communication systems.

Working Principle

The MC100EL33DTR2G features a dual D-type flip-flop design which provides a simple method of generating two separate outputs from a single input. The D-type flip-flop consists of two cross-coupled NOR gates, with two input signals (D and CLK) and two output signals (Q and Q BAR). When the clock signal is LOW, the output responds to changes in the D input. When the CLK signal goes HIGH, the D input is latched and the output is held in its current state, until the CLK signal is driven LOW again. With this design, the flip-flop can act as a frequency divider, with each toggle of the CLK signal resulting in a PRE/WAIT state and a SET/CLEAR state.

Additionally, the MC100EL33DTR2G also supports asynchronous preset and clear operations. When the PRESET (PRE) and CLEAR (CLR) are driven LOW at the same time, the device sets to a logical ‘0’ or ‘1’ depending on the state of the asynchronous CLEAR (CLR) and PRESET (PRE) inputs. This feature allows for total device reset as well as fine control of the D flip-flops.

Overall, the MC100EL33DTR2G is an excellent choice for low-voltage, ultra-low-power applications, such as clock dividers and counters. With its dual D-type flip-flop design, it provides a simple, efficient way to generate two separate outputs from a single input. The device also offers excellent switching characteristics and high speed operation, making it the perfect choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference