MC10E151FNR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-Flip Flops are essential and essential components in the design of large digital systems. MC10E151FNR2G is a flip flop, offering a fast propagation delay with minimal standby power. It is used for data storage and retrieval. The device is designed for microprocessor-based applications such as disk drives, data acquisition systems and point-of-sale terminals.

The MC10E151FNR2G is a Logic-Flip Flop consisting of a master-slave flip-flop. With this device, a single input signal can be applied and then stored in the device. When the input signal is changed, the device responds with the output signal being arranged ahead of the old one. This type of memory device has the capability to output a signal which is the same as the input signal at the previous time interval. It can therefore be used to store data and its operation is controlled by a clock signal.

The clock signal determines the state of theMC10E151FNR2G. When the clock signal is a high state, the device is inhibited from outputting. When the clock signal is a low state, the output state is determined by the logic level of the data input signal. In such cases, the output of the device follows the input signal.

The MC10E151FNR2G is configured using an active-low reset (R) input and an active-low clock (CP) input. To set the device, an active-low Set (S) input is used. When the set and reset inputs are low, the device can be operated via the clock input. When the set input is low, the device is activated and the output state is determined by the value at the data input. When the reset input is low, the device sets its output to low.

The MC10E151FNR2G is typically used for various applications, such as clocked sequential logic, memory, registers and microprocessor interfacing. It can also be used in logic circuits for converting analog signals to digital signals. Other applications are in the interfacing of computers and other systems with access control systems. The device can be used in conjunction with ALUs, muxes and counters.

The MC10E151FNR2G is well suited for use in any system that requires data storage, or for providing logic or timing signals. It has a low power consumption and is available in a small package size, so it can be easily incorporated into circuits where space is at a premium. Additionally, it is capable of operating over a wide temperature range, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference