MC10H174PG

Series:	10H
Packaging:	Tube
Part Status:	Obsolete
Type:	Multiplexer
Circuit:	2 x 4:1
Independent Circuits:	1
Current - Output High, Low:	--
Voltage Supply Source:	Dual Supply
Voltage - Supply:	-4.94 V ~ -5.46 V
Operating Temperature:	0°C ~ 75°C
Mounting Type:	Through Hole
Package / Case:	16-DIP (0.300", 7.62mm)
Supplier Device Package:	16-DIP
Base Part Number:	10H174

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-Signal Switches, Multiplexers, DecodersMC10H174PG is a device from the family of logic-signal switches, multiplexers, decoders manufactured by Motorola Semiconductor and designed to switch data paths in devices like digital transmitters, modulators, and demodulators. Its application fields range from cellular, digital video broadcasting and audio-video systems to instrumentation, local area networks and telecommunications. The MC10H174PG has a single-ended eight-channel multiplexer with a 3-bit binary address input (A1-A3), a data input (D) and a data output (Q). The binary input address decides which input data is channeled to the output. The channel that is selected is indicated by its relevant bit in the 3-bit address, A1-A3. If the selected bit is "0" the output is low, if it is "1" the output is high. The device operates in two different power modes, the active mode and the power-down mode, allowing ICs that use the MC10H174PG to properly operate in low power applications. The device is designed with a 24V ESD protection rating and can operate over a wide temperature range of -55°C to 125°C.In terms of its working principle, MC10H174PG provides a straightforward digital “switch” capability to its users as it is designed to connect one of the two data sources to the output based on the binary input address. The device response is such that the output is deselected at the same time as the input is selected and the output will remain unchanged if the condition of the data select and data input are both “0” or both “1”. Since the device is designed to switch data paths between multiple sources, its usage is known to reduce signal crosstalk and signal ringing in a wide range of digital applications. In systems with MC10H174PG, the output is less disturbed by the noise components of the signal unlike the application circuits without it. This is because the device is designed with an inverter level translator, which basically functions to drive the signal data from one device to the other.In automation systems that require analog-to-digital converters (ADC), the data rate of incoming signal is usually limited by the delay times of the switcher which limits the MC10H174PG usage. This is because the switching speed of the device is not able to keep up with the data rate of the incoming signals under high-frequency conditions. To overcome this limitation, devices such as the MAX5932CPA+ (from Maxim Integrated Product) and the TLC2760CD (from Texas Instruments) are often used as they are designed to switch up to 500 MHz signals.To summarise, the MC10H174PG device is part of the family of logic-signal switches, multiplexers, decoders and is capable of providing a straightforward digital switch capability in order to switch data paths between multiple sources. The device is designed for operating with low power and can operate over a wide temperature range from -55°C to 125°C. Since the device is designed with an inverter level translator, it is known to reduce signal crosstalk and signal ringing in a wide range of digital applications. Nevertheless, its usage is limited by its slow switching speed under high frequency conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description