MC10H188MG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC10H188MG is a logic device designed for industry and application field use. It is designed as a versatile and affordable solution for digital signal recognition, buffering and conditioning. This device provides enhanced signal recognition performance and improved power consumption over traditional logic devices.

MC10H188MG includes both a driver and a receiver. The driver provides a signal to the receiver which then converts it into a logic level to be used by other logic devices. The receiver is a three-state buffer with two control pins, a single enable pin and a power pin. The signal is recognized by the driver and its logic level is determined by the logic levels present on the two control pins. The enable pin enables the receiver to detect the signal while the power pin provides power to the receiver.

The signal recognition of the MC10H188MG is a combination of edge and level detection. When the enable pin is on and the power pin is connected, the signal source is detected and the logic level is calculated by the logic present on the two control pins. The logic level is then sent to the receiver which is used to control other logic components. The output voltage of the receiver can be tuned to different logic levels by changing its logic levels.

The MC10H188MG also includes two transceivers which control the data flow between two different devices. The transceivers detect the high and low levels of the signal and provide corresponding logic levels to the receiver. The transceivers are also able to sense an idle or low level of the signal from the source and provide a logic level in response. This feature allows for bi-directional communication between two different devices.

The MC10H188MG has a power consumption of 2.5W during active operation. The device provides very low active power consumption when only one device is receiving data and can reach as low as 0.1W for multiple receivers receiving data. The device also has low standby power consumption which means that it can be left in an idle state to save power when not required.

The MC10H188MG also includes a built-in temperature-sensing feature. It allows the device to shut off its power when the temperature exceeds a certain limit to protect the components. The device also has two modes of operation- active and standby- which can be used to optimize power consumption.

Overall, the MC10H188MG is an effective and efficient solution for digital signal recognition, buffering and conditioning. It is capable of providing enhanced signal recognition performance, improved power consumption and bi-directional communication between two different devices. The built-in temperature sensing feature also makes it safer for use in industrial applications.

The specific data is subject to PDF, and the above content is for reference