MC10H605FNR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic translators and level shifters are electronic components that enable data transfer between multiple sub-systems with different logic and power levels. The MC10H605FNR2G is an important device in this field. It provides an effective means of inter-IC communication, even when the sub-systems have different logic and power levels.

This device is a dual one-hot-to-four-bit translator that has a typical operating voltage range of 2.5V to 3.6V and an input voltage range from 0V to Vcc. It features an enable (EN) input, which can be used to control the output enable signal. The EN input is internally connected to ground through an internal pull-down resistor, allowing the device to be disabled when the input is held low.

The MC10H605FNR2G is mainly used in logic-level shifting and data-bus translation applications. It can be used to drive multiple-bit buses on different levels, as well as enable data transfer between different logic levels. The enable input allows the translator to switch between two separate one-hot signals which are routed to four different outputs, so that devices operating on different voltage levels can be interfaced.

When used in logic-level shifting applications, the device can provide the necessary logic-level conversion to allow digital signals to be communicated between two different logic levels. The device also features a power-on reset (POR) input, which enables the translation circuitry to be reset after system-level power-on.

The MC10H605FNR2G is a highly capable device and its wide range of features makes it an ideal choice for any logic-level shifting or data-bus translation applications. It can handle a wide voltage range, has excellent noise immunity and its internal pull-down resistor enables the device to be easily disabled when needed.

The device uses the CMOS process and its internal circuit consists of transistors, resistors, and diodes to provide the necessary translation. The CMOS process allows the device to be operated at very low power consumption, making it an ideal choice for battery-powered applications.

The device’s data-bus translation capabilities make it an excellent choice for applications that require data to be transferred between devices that operate at different logic levels. The use of the EN input in this application also means that data can be transferred between the devices in both directions.

The MC10H605FNR2G is an effective device for inter-IC communication in a variety of situations. It is a highly capable and versatile device, which makes it a valuable component of any circuit design. The wide voltage range and excellent noise immunity make it an ideal choice for any logic-level shifting or data-bus translation applications.

The specific data is subject to PDF, and the above content is for reference