MC10H646FNR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC10H646FNR2G is a 6-to-1 low-power buffer/driver with 3-state outputs that is designed for off-chip clock and low-skew fan-out applications. It is designed for applications that require the drive of high-frequency signals over long traces, and the buffering of signals with high load capacitance. It is particularly suitable for applications that require many clock inputs, such as system designs with multiple processor cores.

The MC10H646FNR2G is composed of six independent buffers, each of which is capable of driving up to six loads. Each buffer contains a 3-state gate that can be used to control the output state of the buffer. In addition, each buffer contains an active-low enable pin that can be used to control the output level of the clock signal. By driving the enable pin low, the output state of the buffer is forced to low and the buffer is disabled.

As far as working principle is concerned, the MC10H646FNR2G operates as a voltage follower when driven from a single ended input. In this configuration, the output voltage of the buffer is equal to the input voltage. When driven from a differential input, the output voltage is slightly better than the input voltage, but the difference is generally insignificant. The buffer is designed to drive up to eight different loads, and its slew rate is greater than 4ns. This makes it ideal for driving high-frequency clock signals over long distances.

The MC10H646FNR2G is widely used in applications such as clock and data distribution, memory interface, high-speed processor designs, and high-speed SerDes designs. In addition, the buffer can be used to fan-out low-skew clock signals in systems with multiple processor cores or on-chip buses. It is also suitable for applications in which the data rate of the signal being buffered exceeds that of the signal source.

The MC10H646FNR2G\'s low-power consumption makes it ideal for applications that require constant clock signal supply. The buffer dissipates only 1 mA at a supply voltage of 5 V, and it can be operated over a wide supply voltage range (2.5 V to 3.6 V). Furthermore, the device features an ESD rating of 2 KV, making it suitable for use in systems that require maximum protection against ESD threats.

In conclusion, the MC10H646FNR2G is a low-power buffer/driver with 3-state outputs that is designed for off-chip clock and low-skew fan-out applications. It is used in applications such as clock and data distribution, memory interface, high-speed processor designs, and high-speed SerDes designs. It is perfect for when the data rate of the signal being buffered exceeds that of the signal source, thanks to its 4ns slew rate. Furthermore, its low-power consumption makes it ideal for applications that require constant clock signal supply.

The specific data is subject to PDF, and the above content is for reference