MC74ACT241DWR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic devices are fundamental building blocks of all digital electronic systems. They are a bridge between the analog and digital worlds, often functioning as switches to control the flow of digital data. Logic devices use Boolean logic and can be used to perform complex logical functions. One of the most important logic device types is the Buffer. Buffers are logic devices that act as interface between the source and destination sides of an circuit. They are used to reduce electrical loading on a line, and to provide isolation between sections of a circuit.

The MC74ACT241DWR2G is a Quad 3-State Buffer. Buffers accept a single input and provide a single output. This allows data to travel in only one direction, preventing any current loops or ground loops. MC74ACT241DWR2G buffered input signals are a bit slower than unbuffered signals, and may require longer rise and fall times, depending on the application.

The MC74ACT241DWR2G buffers have four independent buffers in one package that can each transmit or receive data. They are designed for high-performance, low power applications and have a wide operating voltage range. The \'241 part is specifically Fast-SCHMITT buffer. A Schmitt input prevents the output from being affected by false signals due to noise and allows easier logic driving. The Schmitt buffer is also known as a "hysteresis" buffer.

The MC74ACT241DWR2G buffers are rated at 25 MHz with a maximum operating voltage of 5.5V and a minimum operating voltage of 2V. They feature open drain outputs, allowing multiple buffers to be connected together. This is done by wiring the output of one buffer to the input of another. The open-drain technique provides additional flexibility as all the inputs can be connected together.

The MC74ACT241DWR2G offers high input impedance, wide supply voltage range and low power consumption. It is widely used in data communications, memory interface, bus systems, networking, and other communication interface applications. It is also used in both 3.3V and 5V digital logic circuits to provide protection for devices sensitive to high-speed switching signals.

The MC74ACT241DWR2G is an extremely versatile device. Its details and characteristics can be found in the data sheet from the manufacturer. Its working principle is relatively simple: when an input signal is applied, it transfers or amplifies the signal and then outputs it at a higher voltage, usually higher than its input voltage. The output signal is then connected to another buffer, allowing the data to be transmitted between two circuit sections. This can be done very quickly, allowing for faster data transfer.

In conclusion, the MC74ACT241DWR2G is a high-performance, low-power buffer. It is a versatile device which is widely used in a variety of applications, including data communications, networking, and memory interface. It is also used to provide protection to devices sensitive to high-speed switching signals. It operates on a wide operating voltage range and its outputs can be connected together to allow for multiple buffers in one package.

The specific data is subject to PDF, and the above content is for reference