MC74HC245AFELG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74HC245AFELG is a level-converting 16-pin integrated circuit device. This versatile device is categorized as a Logic - Buffers, Drivers, Receivers, Transceivers component, and it is commonly used in analog-to-digital and digital-to-analog applications.

The MC74HC245AFELG is an octal Bus Transceiver component with Non-Inverting 3-State outputs. It is designed to expand or buffer the data signaling for applications requiring multiple source routing. This component can be used to turn a unidirectional or bidirectional transmission path into an eight-way switch.

The core structure of the MC74HC245AFELG is D-type transparent latches with bi-directional three-state outputs that are ideal for multiplexing or analog applications. It uses positive logic and requires an external component such as an open-drain bus buffer to supply logic levels to the data bus.

These devices also feature two independent control lines, called A1 and A2, which are used to select which of the two data buses provides valid data. When A1 and A2 are both low, the data is transferred from the A side to the B side and vice versa.

The other features of the MC74HC245AFELG include integrated Schmitt-trigger inputs on all lines, high-speed operation, and an adjustable power supply voltage of 2.7V to 5.5V. It also features high noise immunity of up to 250mV peak-to-peak and low power consumption with a standby mode of 400nA.

The receiver and transmitter section of the MC74HC245AFELG works in two modes. The first mode is the multiplex (MUX) mode, which allows up to eight data sources to be connected to the device. In this mode, only one of the data sources is active at a time, depending on the logic levels on A1 and A2.

The second mode is the demultiplex (DEMUX) mode, which works in the opposite way. This mode allows up to eight data sources to be connected to the MC74HC245AFELG, with one of the data sources active at a time. This mode is enabled by the logic states on A1 and A2.

The working principle of the MC74HC245AFELG is one of logic level shifting, which allows data from one logic environment to be transferred to another. This is accomplished by connecting one set of logic lines to the upper data bus and the other set of logic lines to the lower data bus.

When A1 and A2 are both low, the MC74HC245AFELG transmits data from the A side to the B side and vice versa. When A1 and A2 are high, the device is in the idle state and no data is transmitted, allowing the other data sources to be selected.

The MC74HC245AFELG is an ideal level-shifter solution for a wide variety of applications and is very useful in mixed-signal designs where transistors or optocouplers are unable to provide the level-shifting functionality. Its low power consumption and wide operating voltage range make it suitable for a range of low-power applications.

The MC74HC245AFELG is excellent for providing buffered and multiplexed transmission paths for applications such as electromechanical systems, consumer electronics, and digital signal processing (DSP). It is also ideal for applications requiring fast-speed data transfer and for achieving minimal power losses in digital circuits.

The specific data is subject to PDF, and the above content is for reference