MC74LCX125DTR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74LCX125DTR2 is a device in the Logic - Buffers, Drivers, Receivers, Transceivers category. It is a low-power, low-voltage version of the original 74LCX family. This device is both bus-compatible and backward-compatible with existing TTL products, improving upgrading from 74LCX to 74LCX125 and enable the implementation of new designs. This device is perfect for medical and automotive applications that require logic with low leakage current and low-voltage operation.

The functionality of the MC74LCX125DTR2 is to buffer and provide buffered outputs of 2-bit to 8-bit data. It is a universal bus-transceiver/buffer, which means it incorporates a buffer/driver and a bus transceiver in a single package. This device is capable of sending and receiving data on the same processor-based bus.

This device uses three-state logic, the logic inputs can drive the outputs in the high or low states. When the output enable (OE) pin (pin 12) is high, the outputs are three-stated (disabled). The outputs are enabled when the OE pin is low.

The MC74LCX125DTR2 has two control signals, the OE (output enable) and the TYP (type select). The TYP signal controls the logic operation of the device. In the low state the device is setup in the receiver mode, the inputs are latched, and the outputs are in the high impedance state (three-state). In the high state, the device is in the driver mode, the outputs are enabled, and the inputs are ignored.

The MC74LCX125DTR2 is mainly used in digital systems. It has been designed as a bus buffer, allowing data transfer between multiple buses, such as between microprocessors and I/O peripherals, or within a microprocessor. It is also used in communications applications such as data buses, peripheral buses, and streaming data applications. It is perfect for medical and automotive applications that need logic with low leakage current and low-voltage operation.

The MC74LCX125DTR2 has a wide voltage range, from 1.2V to 5.5V. This allows the device to be used in a wide range of applications and provide compatibility with various voltage standards. The device is also capable of withstanding voltages up to 7V. This device also has an extremely low current consumption, only 10µA (typical) when the outputs are in the three-state mode.

The MC74LCX125DTR2 is designed to work in both commercial and industrial temperature ranges, withstand high temperatures and wide operating voltages. It also has low power consumption and excellent ESD protection, making it perfect for harsh and extreme environments. This device is also ESD-protected, allowing it to withstand up to 6kV ESD pulses. This device also supports both hot plugging and hot swapping.

The MC74LCX125DTR2 is a good logic device for applications that require both low-power and low-voltage operation. The device is excellent for bus buffer, communications, medical and automotive applications. It is also capable of withstanding high temperatures and wide operating voltages, making it perfect for harsh and extreme environments. This device also provides excellent ESD protection, allowing it to withstand up to 6kV ESD pulses.

In conclusion, the MC74LCX125DTR2 is a logic device in the category Logic - Buffers, Drivers, Receivers, Transceivers. It is a low-power, low-voltage version of the original 74LCX family. This device is excellent for bus buffer, communications, medical and automotive applications. It is also capable of withstanding high temperatures and wide operating voltages, making it perfect for harsh and extreme environments. This device also has excellent ESD protection, allowing it to withstand up to 6kV ESD pulses, and it supports both hot plugging and hot swapping.

The specific data is subject to PDF, and the above content is for reference