MC74LVX244DTR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC74LVX244DTR2G is a Logic-Buffers, Drivers, Receivers, Transceivers, integrated circuit in a 20-pin Dual In-line Package. This device is aa-level logic buffer/line receiver which is used to translate the output of an FPGA, CPLD, ASIC, or other logic device into standard logic levels. It transmits data in the form of logical “1s” and “0s” and it can also be used as a transmission medium between the systems and registers.

This device has a dual-rail hierarchical bus architecture that is optimized for low power and high performance. The MC74LVX244DTR2G consists of two main blocks, a logic blocker and a data transmitter. The logic blocker, which compensates for the signals, is responsible for ensuring that the data is transmitted correctly and reliably. The data transmitter is responsible for the actual transmission of data.

The logic blocker portion of the MC74LVX244DTR2G consists of two main components, a buffer and a line driver. The buffer is used to convert the input signals from low level to high level. It is composed of two complementary inputs, two outputs and a bandwidth setting input. The bandwidth setting input is used to set the upper frequency limit at which the device will operate. This setting is adjustable to match the logic speed of the system.

The line driver is responsible for further translation of the input signal from the buffer and to drive the data onto the next transmission medium. The line driver also contains two complementary inputs and two outputs. In addition, it also has one enable and one select/inhibit input, as well as a slew rate control input. The enable and the select/inhibit inputs respectively provide logic control inputs and can be used to allow or inhibit transmission on the line, while the slew rate control input allows the user to set the response of the device to low frequency capacitive loading conditions.

The data transmitter is responsible for actual data transmission. It contains two complementary inputs, two output pins, two enable/select inputs, and a tristate control/enable input. The complementary inputs allow the user to choose whether the device will operate in a single-ended or differential mode. The tristate control/enable input is used to select whether the device is enabled or put in a high impedance state. The enable/select pins allow the user to control the data transmission and the output lines allow the data to be driven onto the transmission medium.

The MC74LVX244DTR2G is a very useful device for many applications. It allows for high-speed data transmission over long distances and is suitable for use in systems with high speed data transmission, such as networking applications. It is also useful for driving signals onto communication buses and is used in embedded applications because of its low power consumption. In addition, it has a robust noise margin, making it reliable in all types of environments.

The specific data is subject to PDF, and the above content is for reference