MC74VHC1G50DTT1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74VHC1G50DTT1G is a high-speed, single inverter with input and output pin protection from static charge. It belongs to the Logic - Buffers, Drivers, Receivers, Transceivers group. It is well-suited for applications such as logic function extension, gate buffering, gate input protection and gate output buffering, as well as full bridge line drivers.

The MC74VHC1G50DTT1G is an ideal solution for situations with higher speed and/or increased current requirements than can be provided with smaller, simpler buffer gates. Output drivers are capable of providing up to 25mA current with very low propagation delay and propagation delay variation. The low power dissipation and miniature 6-Pin SOT-563 Package make the MC74VHC1G50DTT1G ideal for high-speed, point-to-point digital data transmission.

The MC74VHC1G50DTT1G can be used in applications such as digital signal transmission, buffers and transceivers, decoder and memory address drivers, bus drivers and multiplexers, parity generators, logic expanders and so on. Furthermore, it can also be used as a front-end driving device for Light-Emitting Diode (LED) arrays and liquid crystal displays (LCDs).

The MC74VHC1G50DTT1G contains two independent inverters and is, like all other logic field devices, connected in a three-state connection, with each output connected to an input. This arrangement allows it to drive multiple loads, where each load is connected to the output of its input. The inputs of each device are open-collector and are unpowered, allowing the inputs and outputs to remain in the off state, but still allowing the device to function normally when the logic levels change.

The MC74VHC1G50DTT1G has one input and one output and is used to invert an input voltage into an output voltage. The input voltage can be from 0V to VCCx, where VCCx is the supply voltage. An input voltage of 0V results in an output voltage of VCCx and an input voltage of VCCx results in an output voltage of 0V. Since this device is an inverter, the input voltage must always be less than the supply voltage.

The MC74VHC1G50DTT1G has two output drivers and two output transistors. The two output drivers provide up to 25mA current. The two output transistors are designed to protect the device from excessive current and to keep the output in the off state when the input voltage is less than the supply voltage.

The MC74VHC1G50DTT1G features two protection mechanisms used to protect both input and output pins from static discharges and ESD (Electrostatic Discharge). The first mechanism is a P-channel enhancement mode MOSFET which allows the input pin to discharge static energy and ESD more quickly. The second mechanism is a double ESD protection circuit which provides extra protection to both the output and input pins.

In summary, the MC74VHC1G50DTT1G is a high-speed, single inverter with input and output pin protection from static charge. It is well-suited for applications such as logic function extension, gate buffering, gate input protection, and gate output buffering, as well as full bridge line drivers. It can be used in applications such as opaque detectors, buffers and transceivers, decoder and memory address drivers, bus drivers and multiplexers, parity generators, and logic expanders. The MC74VHC1G50DTT1G also features two protection mechanisms used to protect its input and output pins from static discharges and ESD.

The specific data is subject to PDF, and the above content is for reference