MC78L05ABD

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

MC78L05ABD series positive voltage regulator Cheap, easy-to-use equipment suitable for a variety of Applications requiring up to 100 mA regulated power supply. like Their higher power MC7800 and MC78M00 series cousins, these Voltage regulator with internal current limit and thermal shutdown Make them very strong. No external components The MC78L00 device is required in many applications. These devices provide significant performance advantages Traditional Zener diode-resistor combination as output impedance And the quiescent current is greatly reduced.

2. Feature

    1. A variety of available fixed output voltages

    2. low cost

    3. Internal short-circuit current limit

    4. Internal thermal overload protection

    5. No external components required

    6. Provide complementary negative regulator (MC79L00A series)

    7. NCV prefix used for automobiles and other needs Unique site and control change requirements; AEC-Q100 Qualified and capable of PPAP

    8. These are lead-free devices

3. Pin configuration

4. APPLICATIONS INFORMATION

The MC78L00A Series of fixed voltage regulators are designed with Thermal Overload Protection that shuts down the circuit when subjected to an excessive power overload condition. Internal Short Circuit Protection limits the maximum current the circuit will pass. In many low current applications, compensation capacitors are not required. However, it is recommended that the regulator input be bypassed with a capacitor if the regulator is connected to the power supply filter with long wire lengths, or if the output load capacitance is large. The input bypass capacitor should be selected to provide good high−frequency characteristics to insure stable operation under all load conditions. A 0.33 F or larger tantalum, mylar, or other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be mounted with the shortest possible leads directly across the regulators input terminals. Good construction techniques should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead. Bypassing the output is also recommended.