MCF54415CMJ250

Program Memory Type:	ROMless
Base Part Number:	MCF54415
Supplier Device Package:	256-MAPBGA
Package / Case:	256-LBGA
Operating Temperature:	-40°C ~ 85°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 8x12b, D/A 2x12b
Voltage - Supply (Vcc/Vdd):	1.14 V ~ 1.32 V
RAM Size:	64K x 8
EEPROM Size:	--
Series:	MCF5441x
Program Memory Size:	--
Number of I/O:	87
Peripherals:	DMA, PWM, WDT
Connectivity:	1-Wire®, CANbus, EBI/EMI, Ethernet, I²C, SmartCard, SPI, SSI, UART/USART, USB, USB OTG
Speed:	250MHz
Core Size:	32-Bit
Core Processor:	Coldfire V4
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MCF54415CMJ250
MCF54415CMJ250 is an Integrated 32-bit Microcontroller based on ColdFire Core V2 and ColdFirePlus Core V1. It is suitable for applications where space, power and performance are critical. This microcontroller features an array of peripherals and presents with a highly integrated bus/memory system. The microcontroller is embedded with enhanced optimization techniques to reduce size, power consumption and better performance.
MCF54415CMJ250 Application Fields
The MCF54415CMJ250 microcontroller is used in embedded applications. With its powerful memory system, it is used in many embedded applications such as the automotive, industrial and medical fields. In the Automotive industry, the microcontroller is mainly used in engine control and safety systems, vehicle body electronic control, navigation, comforts and many other aspects. In the Industrial field, it is used to control turning machines, robotic system and automation process. In the medical field, it is generally used as medical equipment control like infusion pumps, ultrasound and many other control systems. Additionally, the device is also suitable for Smart Home systems and Security systems.
MCF54415CMJ250 Working Principle
The MCF54415CMJ250 is a 32-bit microcontroller based on the ColdFire Core V2 and the ColdFirePlusCore V1 architecture. This microcontroller has a sophisticated bus subsystem with SRAM/Flash memory, DMA controller, FB-DMA and Power Management Unit (PMU). This device has two 32-bit central processing units (CPUs): the primary ColdFire Core V2 and the secondary ColdFirePlus Core V1 CPU. The Core V2 can run at up to 50MHz while the Core V1 can run at up to 25MHz.
The coldFire Core V2 is designed to offer a high performance, low power and efficient instruction set while the ColdFirePlus Core V1 offers direct access to peripherals and high-speed I/O operations. The ColdFirePlus is also designed to be much more power efficient than the ColdFire core V2 and thus allowing lower power consumption yet higher performance.
The device also has an on-chip Flash memory controller and boot ROM to provide Flash access and bootloader program storage. It also has a 16-bit timer for system scheduling, a 16-bit watchdog timer and a serial peripheral interface (SPI) for communication interface and external device control. Additionally, the device also has an Inter-Integrated Circuit (I2C) interface, a universal asynchronous receiver/transmitter (UART), an analogue-to-digital converter (ADC) and a Quadrature Decoder (QDEC) which are used for data acquisition and communication purposes. This device has an on-chip Read/Modify/Write (RMW) module which enables direct access to the internal memories when needed. The on-chip DMAController also helps to relieve the CPU’s burden and allows efficient data transfer from/to internal or external memories, or I/O peripherals.
The device has an array of external and internal memory interfaces. The internal code and data memory is the on-chip flash (Flexible Flash) and on-chip SRAM. The Flexible Flash and SRAM are connected to the core via dedicated buses (AHB-Lite and AHB for Flash and SRAM memory respectively). The Flash memory can be programmed and erased using dedicated hardware-acceleration logic up to 3.6x faster than a traditional programming and erasing operation while the SRAM is connected to the system bus through dedicated decoding logic to allow fast access to the memory space.
Conclusion
The MCF54415CMJ250 microcontroller is an advanced, high-performance and low power microcontroller specifically designed for embedded applications. This device presents a highly integrated bus/memory system and an array of peripherals which enables efficient data transfer and communication operations. The device is suitable for applications such as Automotive, Industrial and Medical applications. With its powerful memory system and sophisticated bus subsystem, the MCF54415CMJ250 microcontroller is suitable for high performance yet low power embedded applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description