MCSP1250EM

Series:	MCS
Packaging:	Bulk
Part Status:	Active
Mounting Type:	Chassis Mount
Circuit:	SPST-NO (1 Form A)
Output Type:	AC, Proportional Control
Voltage - Input:	8 ~ 32VDC
Voltage - Load:	90V ~ 140V
Load Current:	50A
Termination Style:	Screw Terminal
Package / Case:	Hockey Puck
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCSP1250EM Application Field and Working PrincipleSolid State Relays (SSR) are widely used in power control and industrial automation. One example of their widespread use is in AC and DC power control, where an SSR is used to switch a load on or off based on a control signal. The MCSP1250EM is a type of SSR that is designed to control high-current AC and DC loads in any industrial and commercial application.The MCSP1250EM has two main components: a solid state switch and a power control circuit. The solid state switch is an optically isolated thyristor or MOSFET that is used to switch a high-current AC or DC load. The power control circuit is used to control the switch, monitor the load voltage or current, and provide a low-power control signal that can be used to control the load or switch.The application field of MCSP1250EM includes on/off control of AC or DC load, speed/torque control of motor and compressor capacity control etc. When connected to an AC or DC load, the MCSP1250EM switches it off or on with a low-power control signal. Unlike a mechanical switch, the MCSP1250EM can be triggered with a voltage as low as 5V, allowing for improved safety and improved efficiency.The MCSP1250EM\'s working principle is based on the same principles as other SSR\'s, though it is tailored for higher-current AC and DC loads. An optically isolated thyristor or MOSFET acts as the switch, allowing for high-current AC or DC switching. The power control circuit senses the voltage or current of the load, and triggers the optically isolated thyristor or MOSFET. This in turn switches the load on or off.The MCSP1250EM is designed to eliminate the need for complex and expensive PLC setups, as it can be controlled with a simple low-voltage signal. This makes it ideal for applications in data centers, commercial buildings, and industrial automation. Additionally, since the MCSP1250EM is designed for high-current loads, it can also be used in safety applications where the load must be controlled with high precision.In general, the MCSP1250EM checks all the boxes for an SSR that is suitable for controlling AC and DC loads in any situation where precise power control is required. Its built-in protection features, low control voltage requirements, and cost-effectiveness make it an ideal choice for any industrial or commercial application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description