MCZ2010AH201L4T000 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes (MCZ2010AH201L4T000) are electromagnetic devices that are used to reduce the level of electromagnetic interference (EMI) in applications, where interference is caused by currents flowing through loops formed by two lines or multiple lines connected in parallel. These devices consist of a number of soft iron laminations that form a magnetic core, wound with two coils of wire, connected in a symmetrical arrangement. The two coils are wound around the core in opposite directions.

When an alternating current is passed through the two coils, the two coils act as inductors, and the magnetic flux lines generated by each coil join up at the magnetic core, where a common mode voltage is generated, acting to cancel out the two opposite currents, which results in the reduction of interference. This common mode voltage also acts to reduce the amplitude of any common mode noise that might be present in the system. The higher the turns ratio of the two coils, the higher the level of electromagnetic interference reduction.

MCZ2010AH201L4T000 common mode chokes can be used in a variety of applications, including electronic equipment, radio frequencies, telecommunications, medical equipment, and automotive systems. They are also used to reduce the amount of line noise in high-speed data communication systems, and are commonly employed in EMI filters and line filters.

Common mode chokes are also used in power systems, where they act as protection against common mode harmonics, created by non-linear loads such as rectifiers, inverters, etc. The common mode choke acts as a low pass filter, allowing only the fundamental frequency of the power system to pass through, while blocking out the harmonic frequencies, thus preventing the harmonic frequencies from creating a higher level of electrical noise in the system.

Common mode chokes can also be used in AC power lines, where they act to reduce the common mode currents, which helps to reduce the level of electromagnetic interference caused by the AC power. The common mode choke acts as a low pass filter, allowing the AC power line frequency to pass through, while blocking out any higher frequency noise or interference.

MCZ2010AH201L4T000 common mode chokes are widely used in all types of electronic systems, where interference reduction is required. They are available in various types, sizes, and shapes, and are designed to meet specific requirements for a particular application.

The specific data is subject to PDF, and the above content is for reference