MCZ2010CH240L4T Filters |
|
Allicdata Part #: | 445-8647-2-ND |
Manufacturer Part#: |
MCZ2010CH240L4T |
Price: | $ 0.20 |
Product Category: | Filters |
Manufacturer: | TDK Corporation |
Short Description: | CMC 100MA 4LN 24 OHM SMD |
More Detail: | 4 Line Common Mode Choke Surface Mount 24 Ohms @ 1... |
DataSheet: | MCZ2010CH240L4T Datasheet/PDF |
Quantity: | 5000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
5000 +: | $ 0.17968 |
10000 +: | $ 0.17388 |
25000 +: | $ 0.16808 |
Voltage Rating - DC: | 5V |
Package / Case: | 0804 (2010 Metric), 8 Lead |
Height (Max): | 0.024" (0.60mm) |
Size / Dimension: | 0.079" L x 0.039" W (2.00mm x 1.00mm) |
Mounting Type: | Surface Mount |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 85°C |
Voltage Rating - AC: | -- |
Series: | MCZ-CH |
DC Resistance (DCR) (Max): | 1 Ohm |
Current Rating (Max): | 100mA |
Impedance @ Frequency: | 24 Ohms @ 100MHz |
Number of Lines: | 4 |
Filter Type: | Signal Line |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes (CMC) are typically used in power electronics applications to reduce common-mode as well as transient interference. In particular, CMCs have a wide range of applications where high frequencies (e.g. switching frequencies) must be suppressed. This type of application may involve motors, inverters, drives, protection circuits, and power supplies. The MCZ2010CH240L4T is an example of a common mode choke and is used in many applications.
The MCZ2010CH240L4T is a high-performance, low-profile common-mode filter choke designed to reduce the flow of common-mode current between two points in a system. It has a high impedance in all frequency ranges and is designed to be used in applications where radio frequencies and other high-frequency signals cause unwanted noise. It can be used in applications ranging from power supplies, inverters, and drives to audio/video and telecommunications.
The MCZ2010CH240L4T is constructed with a core winding arc with four intermittent sections connected together. This type of construction gives the choke a very wide working frequency range of 10Hz to 100MHz with an attenuation of 20dB or more at Operating Temperature (OT). It is made from ferrite material and has high mechanical strength so it will withstand even hostile environments without deteriorating or breaking down. This common mode choke also exhibits superior shielding characteristics, has low loss factors, and is highly reliable.
The MCZ2010CH240L4T is designed to reduce both common-mode and transient interference. It works by inductively coupling unwanted signal to a ground which is then rejected. The ferrite core material is the key to its working principle. The ferrite core creates a high impedance to common-mode signals, while allowing a differential signal to pass but at a greatly reduced level. This means that the common-mode signal is rejected, while the differential signal is passed through with minimal interference.
The MCZ2010CH240L4T is used in a wide variety of applications, such as motor speed controllers, inverters, drives, protection circuits, and power supplies. It can be used for shielding, noise cancellation, signal filtering, and signal isolation. It is also a key component in EMI suppression and protection circuits. In addition, it can be used for attenuating high frequency noise, providing EMC (electromagnetic compatibility) protection, and improving power line quality.
In conclusion, the MCZ2010CH240L4T is a common mode choke that is used in a variety of power electronics applications. It has a high impedance at all frequencies and is highly reliable. It works by inductively coupling unwanted signals to a ground which is then rejected. It is used for shielding, noise cancellation, signal filtering, and signal isolation. It is a key component in EMI suppression and protection circuits and also helps to attenuate high frequency noise, providing EMC protection, and improving power line quality.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MCZ2010DH900L4T000 | TDK Corporat... | 0.18 $ | 5000 | CMC 100MA 4LN 90 OHM SMD4... |
MCZ2010AH900 | TDK Corporat... | 0.16 $ | 10000 | CMC 100MA 4LN 90 OHM SMD4... |
MCZ2010AH201L4T000 | TDK Corporat... | 0.16 $ | 1000 | CMC 100MA 4LN 200 OHM SMD... |
MCZ2010CH900L4T | TDK Corporat... | 0.2 $ | 1000 | CMC 100MA 4LN 90 OHM SMD4... |
MCZ2010CH240L4T | TDK Corporat... | 0.2 $ | 5000 | CMC 100MA 4LN 24 OHM SMD4... |
MCZ2010AH121 | TDK Corporat... | 0.16 $ | 25000 | CMC 100MA 4LN 120 OHM SMD... |
MCZ2010AH121L4T000 | TDK Corporat... | 0.16 $ | 1000 | CMC 100MA 4LN 120 OHM SMD... |
MCZ2010AH121L4TA0G | TDK Corporat... | 0.16 $ | 1000 | CMC 100MA 4LN 120 OHM SMD... |
MCZ2010AH201L4TA0G | TDK Corporat... | 0.16 $ | 1000 | CMC 100MA 4LN 200 OHM SMD... |
MCZ2010AH900L4T000 | TDK Corporat... | 0.16 $ | 1000 | CMC 100MA 4LN 90 OHM SMD4... |
MCZ2010AH900L4TA0G | TDK Corporat... | 0.16 $ | 1000 | CMC 100MA 4LN 90 OHM SMD4... |
MCZ2010CH240L4T000 | TDK Corporat... | 0.2 $ | 1000 | CMC 100MA 4LN 24 OHM SMD4... |
MCZ2010CH240L4TA0G | TDK Corporat... | 0.2 $ | 1000 | CMC 100MA 4LN 24 OHM SMD4... |
MCZ2010CH900L4T000 | TDK Corporat... | 0.2 $ | 1000 | CMC 100MA 4LN 90 OHM SMD4... |
MCZ2010CH900L4TA0G | TDK Corporat... | 0.2 $ | 1000 | CMC 100MA 4LN 90 OHM SMD4... |
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...