MGN1C-DC24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MGN1C-DC24 is a power relay designed for applications with current requirements of over 2 amps. This industrial strength relay can be used to control a wide variety of high current applications. It is made up of two components – an armature and a solenoid. The armature is a solid piece of hard rubber with an inner core of flexible copper that responds to an electromagnetic force. The solenoid is a barrel-like component encasing a coil of wire. When a current is sent through the coil of wire, it creates a magnetic field which is then used to energize the armature and move it into position.

The MGN1C-DC24 operates on a normally open circuit design which means it is open until a current is sent to it. When a current is sent to it, an electromagnetic force is created which causes the armature to move and close the circuit. The current that is sent to the relay is determined by the voltage that is used, as well as the resistance of the load which is being controlled. Depending on the type of load being controlled, different voltages and resistances will be used to get the desired force. Depending on the application, the MGN1C-DC24 can be used to control devices which are powered from DC and AC voltage sources.

This relay is built to use an internal magnetic latching system that eliminates the need for physical resetting. This latching system ensures that the armature will remain in the closed position until an opposite voltage is sent to the relay to open the circuit again. This feature prevents the need for external resetting of the circuit and provides greater reliability of operation.

The MGN1C-DC24 power relay is built with a rugged construction for industrial use that is designed to withstand a wide range of temperatures and environmental conditions. It also has a unique environmental seal which helps it to resist dust and moisture contamination and keep the internal components from corrosion. The metal shielding also helps to reduce electromagnetic interference.

The MGN1C-DC24 has a wide range of applications which include controlling lighting, motors, pumps, and other related electrical circuits. It can be used in any application where electric current needs to be measured and controlled. This versatile power relay is designed to handle higher current loads which makes it ideal for uses in industrial applications.

The specific data is subject to PDF, and the above content is for reference