MIC810JYC3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC810JYC3 is a microprocessor supervisor device designed for use in data-acquisition, communication and applications that require controlled CPU start-up and shutdown. This is a low-power device from ON Semiconductor that is built to provide overvoltage protections and power-on reset capabilities. This type of supervisor is usually found in PC/104 systems and is often used in industrial applications requiring voltage monitoring and reset control.

The MIC810JYC3 has an operating voltage range of 0.9V to 5.5V and the operating temperature range is -40°C to 85°C. The IC is available in a 6-Pin SC-70 package and is capable of monitoring VCC, VBAT, VDD, and VDD_DIS. The device is also able to monitor two separate voltages to signal an overall error such as a power compliance violation.

The primary functions of this IC are to provide overvoltage protection and generate reset signals in response to power supply or other errors. It features an internal voltage monitor that can monitor four power supply voltages, including VCC, VBAT, VDD, and VDD_DIS. The MIC810JYC3 can also generate a full power-on reset in response to a rising input voltage, as well as a low voltage reset (LVR) in response to an error in the power supply. Additionally, the device can generate a Power-Good (IO) signal.

The MIC810JYC3 also includes two latching reset pins, RES1 and RES2, which can be used to latch the device when a specified condition is met. This IC can be used to reset the device in cases where there is an overvoltage condition or when the input voltage falls below the preset limits. The device also has an active-low push-pull reset output (RESOUT), for general-purpose applications. This output can be used to reset other ICs in the system.

The MIC810JYC3 features a watchdog timer to prevent system lockup. This timer is driven by a programmable clock source, and it monitors the frequency of an input signal. If the clock stops ticking, the watchdog timer will reset the system and restart it. The watchdog timer also has a power-on reset capability, but it can be disabled if needed.

The MIC810JYC3 can also provide serial/parallel data buffer and direction control. This enables the device to be used in applications where the external serial/parallel data must be monitored, buffered and output to other ICs in the system. The buffer is capable of receiving up to 8 bits of data, and it has input and output pins.

In summary, the MIC810JYC3 is a microprocessor supervisor designed for use in industrial applications. It provides overvoltage protection, power-on reset, low voltage reset, and serial/parallel data buffering. It also features a watchdog timer, which can be used to reset the system in cases where there is an overvoltage condition or when the input voltage falls below the preset limits. This makes it ideal for PC/104 systems or applications where voltage monitoring and reset control are required.

The specific data is subject to PDF, and the above content is for reference