MM74HC125SJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MM74HC125SJ Logic - Buffers, Drivers, Receivers, Transceivers

The MM74HC125SJ is a logic IC, intended for use in buffering and driving logic levels in a high-speed circuit. It has a number of product applications, and has been employed in the world of electronic engineering for many years. The MM74HC125SJ is a three-state, remote-output buffer and driver, and it is compatible with many logic families. Its aim is to reduce power consumption, eliminate the need for separate buffer transistors and increase circuit speeds.

The output of the MM74HC125SJ is able to source up to 25mA and sink up to 48mA, which makes it suitable for driving many loads. For example, the chip can be used to buffer a logic line, such as a bus line, for driving logic inputs of high capacitance. With a propagation delay of around 4 nanoseconds, it is also well suited for high-speed digital circuit applications.

The working principle of the MM74HC125SJ can be broken down into three stages. Firstly, the four inputs are monitored for changes in logic level. When a logic change occurs, the output is activated and an open drain output is created. Secondly, the buffer stage amplifies the logic level previously detected. This is done by using a transistor-transistor logic circuit. Finally, the level present at the output is changed under the control of an enable line.

The MM74HC125SJ is mainly used in applications where level shifting and signal buffering is necessary. It can also be used as a signal repeater or signal switch, and is particularly well suited for signal lines which have high-frequency signals attached. The chip can also be used in a clocked system, making use of its buffering capability in order to reduce signal losses.

The MM74HC125SJ is typically available in a 20 pin DIP package, though its pin-out can vary depending on the manufacturer. It is also available in other package types, including SOIC and TSSOP. Apart from its uses in driving or switching signals, the MM74HC125SJ has a variety of other uses. For example, it can be used as an up/down counter, an addressable latch or as an analog multiplexer. As such, it is a particularly versatile logic device.

The MM74HC125SJ has a wide variety of applications and is very versatile in terms of the various logic processes it can handle. Its low power consumption and fast switching speed, combined with its ability to amplify and buffer signals, give it the power to improve system performance in a range of applications. This makes it a great choice for both low- and high-speed digital circuit designs and applications.

The specific data is subject to PDF, and the above content is for reference