MMBZ5250BT-7-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are used to regulate the flow of currents in electronic circuits. Zener diodes, in particular, are designed to regulate voltage levels by allowing currents to flow in both directions. The MMBZ5250BT-7-F is a single Zener diode used in many applications.

The MMBZ5250BT-7-F is a two-pin, hermetically sealed, glass axial Zener diode designed for surface mount applications. It is designed to operate from -65°C to +175°C. The device is compliant with the RoHS Directive and is available in a packaging format that accommodates today\'s PCB-friendly designs.

The MMBZ5250BT-7-F has a reverse breakdown voltage of 5.2V with a maximum power rating of 350mW. When operated properly, the MMBZ5250BT-7-F can dissipate a maximum of 150mA of current. The device also has a minimum peak forward current of 625mA and a maximum peak forward voltage of 1V.

The MMBZ5250BT-7-F is used in a variety of applications, ranging from voltage regulation, to over-voltage protection, to limiting the instruction set of microcontrollers and other digital logic devices. In solar cell systems, Zener diodes are used to maintain a battery’s voltage level. The MMBZ5250BT-7-F is an ideal choice for such voltage regulation applications as it can safely dissipate a large amount of power.

The working principle of the MMBZ5250BT-7-F is fairly simple. In a forward-biased state (with the voltage applied in the same direction as the arrow on the package label), the current will flow freely. When the voltage exceeds the reverse breakdown voltage, however, the current will stop flowing. Once the voltage drops below the reverse break voltage, the current will flow again. In this way, the MMBZ5250BT-7-F acts as a “limiting valve”, protecting circuits from over-voltages.

In addition to its voltage limiting capabilities, the MMBZ5250BT-7-F is also used in digital logic applications. When used in a logic circuit, the MMBZ5250BT-7-F serves as a logic inverter. When operated in the reverse-biased state (with the voltage applied in the opposite direction as the arrow on the package label), the MMBZ5250BT-7-F will pass a high voltage for a low output and a low voltage for a high output. This allows microprocessors and other digital logic devices to be limited to only certain instructions.

The MMBZ5250BT-7-F is a single Zener diode designed for a wide range of applications. It is often used for voltage regulation, over-voltage protection, and instruction set limiting in digital logic devices. The working principle of this device is relatively straightforward, using a forward-biased current to act as a “limiting valve” and a reverse-biased current to act as an inverter. With its low power and cost, the MMBZ5250BT-7-F can provide an ideal solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference