MOC212VM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output provide electrical isolation between input and output. This isolation is achieved using a light source, usually an LED, and a light detector on the other side. When light is applied to the detector side, it is converted into electrical current, allowing the user to process the input signal without the input being affected by the output or vice-versa. The MOC212VM optoisolator is one such device.

The MOC212VM is a 4-pin optoisolator with a photovoltaic output. It is designed for use in applications where isolation between low currents of input and output signals is critical. The pinouts for this device are: 1 - Input ( cathode), 2 - Output (anode), 3 - Negative Voltage (V-), and 4 - Photovoltaic Output (PPV).

The MOC212VM is a cost-effective, low current optoisolator. It has a maximum input current of 20 mA, a maximum output drive current of 250 mA, and a maximum power dissipation of 1.0 W. It is also UL recognized and has an isolation barrier voltage rating of 5000 Vrms. The device has a high operating temperature range from -40ºC to 85ºC.

The operation of the MOC212VM is based on the principle of photoconductivity, where the light emitted by the LED is absorbed by the photosensitive device and converted into electrical current. It works by first connecting the input signal (cathode) to the LED, which then emits light. This light is then detected by the photo-sensitive device, which generates a current signal at its output (anode). The output signal is then regulated by a voltage clamp circuit, to ensure that it is within the desired voltage range.

The MOC212VM optoisolator is designed for use in various applications, such as audio and video signal isolation, data communication, and instrumentation. It can also be used for applications that require isolation between high voltage circuits and circuits with a low voltage interface, such as in medical systems. In addition, the device can be used in inverters, converters, motor drivers, and many other power conversion applications.

In summary, the MOC212VM optoisolator is a cost-effective, low current optoisolator with a photovoltaic output. It provides electrical isolation between low currents of input and output signals, and is suitable for applications that require isolation between high voltage circuits and circuits with a low voltage interface. The device has a high operating temperature range from -40ºC to 85ºC and is UL recognized, with an isolation barrier voltage rating of 5000 Vrms.

The specific data is subject to PDF, and the above content is for reference