MOC217VM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MOC217VM is a type of optoisolator, more specifically it is a type of transistor-photovoltaic output optoisolator. This type of optoisolator is most commonly used as an interface between electrical systems that have different potentials or are connected to different grounds. The circuit provides effective electrical isolation while still allowing the electrical current or signals to flow through the circuit. The MOC217VM is used in a variety of industrial applications where an isolated interface is required, such as industrial automation and control, motor control, motion control, robotics, and medical devices.

The MOC217VM consists primarily of two components, a light emitting diode (LED) and a photodetector (especially a phototransistor or a photodiode). The LED emits electromagnetic radiation that is detected by the photodetector. When the LED emits light, the photodetector converts the light into electrical current or signals. The electrical current or signals then flow through the circuit, thereby permitting electrical isolation between the two systems.

The MOC217VM optoisolator is typically used in systems that require a strong electrical isolation without the introduction of additional noise or disruption of the signal. The optoisolator provides a high isolation level of up to 5,000Vrms in accordance with UL7719 standards. It also has a wide temperature range of -55°C to +125°C and is also resistant to shock and vibration.

The MOC217VM optoisolator has a maximum input voltage of 12V and a maximum forward current of 50mA. It also has a high switching speed, which is typically around 1 microsecond or faster. The typical typical output voltage is also relatively low, usually in the range of 0.5V to 3.0V. This makes the MOC217VM more suitable for use in low-voltage systems.

In addition, the MOC217VM optoisolator has improved noise immunity. It has a noise rejection ratio of around 92dB, which is well above the required specifications for most applications. This helps to ensure that the signals passing through the circuit are not disrupted or distorted.

The MOC217VM optoisolator also has a number of additional features that make it ideal for industrial applications. It is available in a variety of package sizes, from a tiny SMD surface mount package to a larger thru-hole package. The opto optoisolator does not require any additional components and is also compatible with a wide variety of electrical systems.

In summary, the MOC217VM optoisolator is a transistor-photovoltaic output optoisolator. It provides a high isolation level of up to 5,000Vrms and has a wide temperature range of -55°C to +125°C. It is also resistant to shock and vibration, has a maximum input voltage of 12V and a maximum forward current of 50mA, and has a high switching speed of 1 microseconds or faster. The optoisolator is suitable for use in a wide variety of industrial applications and is available in a variety of package sizes.

The specific data is subject to PDF, and the above content is for reference