MOC3023X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MOC3023X is an optocoupler, also known as an optoisolator, which is an electronic component that isolates electrical circuits by coupling a light-emitting diode (LED) to a photoelectric device. The MOC3023X is a zero-cross optocoupler, meaning that it turns off when the input signal crosses zero volts. It is used for controlling AC loads using electronic circuits.

The MOC3023X is a 6-pin optocoupler in an DIP package, with its primary use being to switch triacs, AC relays, and AC contactors. It can operate at voltages ranging from 6V to 220V AC and is typically used in applications such as AC dimmers and power line communication (PLC). The MOC3023X is also capable of switching DC loads, such as SCR and DC relay, as well as controlling motors.

In terms of its structure, the MOC3023X consists of an LED, an integrated detector, and a control circuit. The control circuit is built to emulate a bi-directional thyristor, which provides protection against transient or continuous overvoltage at the output terminal. The circuit also prevents random triggering, enhances the input threshold, and allows for zero crossing switching between AC and DC loads.

The MOC3023X operates by providing a switching signal at the input, such as DC voltage or a pulse wave or a wave. The signal is then detected on the integrated detector, where it is electrically isolated from the LED. The LED then emits light, which is directed to the photoelectric device tied to the output. This device triggers a current flow through the output, turning on the triac, SCR, or other AC and DC loads. The LED is automatically turned off when the signal voltage falls below a certain threshold.

The MOC3023X can be used in a wide range of different applications, such as switching, motor control, dimming, relay and solenoid control, industrial, commercial and domestic lighting, and any other application that requires high-voltage isolation. It is a cost-effective, easy-to-use, and robust optocoupler for an array of AC and DC applications.

The specific data is subject to PDF, and the above content is for reference