MOC3020S-TA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices used to transfer a signal from one circuit to another without allowing one circuit to influence the other. The MOC3020S-TA1 is a type of optoisolator specifically designed for use in Triac, SCR output applications.

The MOC3020S-TA1 is a 6 pin Surface Mount SMT optoisolator powered by an LED light source. It features a SCR output and a zero crossing detector able to operate from 60 Hz to 1 kHz. The SCR output is triggered with a zero voltage turn-on, enabling higher noise immunity. The LED output current is limited to 5 mA with an LED driver current between 10 mA and 20 mA.

The MOC3020S-TA1 is designed for high reliability and superior performance in harsh industrial and automotive applications. It is integrated with inrush current suppression, built-in safety features, and a robust package design. The MOC3020S-TA1 also has a wide operating temperature range from -40°C to +105°C.

The MOC3020S-TA1 optoisolator is typically used in digital switching applications, such as motor control circuits, lighting control circuits, and other applications which require an isolation of the output signal from the controlling device. It is widely used in industrial and automotive applications, because of its reliability, power efficiency, superior isolation, and safety features.

The working principle of the MOC3020S-TA1 involves two parts: the LED light source and the SCR output. The LED light source is connected to a source of alternating current, and when this current is on, a small current flows through the LED, which in turn emits light. This light is detected by the SCR output of the MOC3020S-TA1. When the light is detected, the SCR triggers and switches on, allowing current to flow from one circuit into the other. The MOC3020S-TA1 is designed to switch off at the zero crossing of the alternating current. This ensures that the device is able to shut off before any in-rush current can occur, giving it greater robustness and reliability.

In summary, the MOC3020S-TA1 is a 6 pin, SMT optoisolator designed for high precision Triac, SCR output applications. It has a LED light source, SCR output, and zero crossing detector. It is used in digital switching applications such as motor control circuits, lighting control circuits, and other applications which require an insulation of the output signal from the control device. The device is robust and reliable due to its safety features and inrush current suppression.

The specific data is subject to PDF, and the above content is for reference