MOC3061SM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MOC3061SM is a type of optoisolator with Triac, SCR output. Optoisolators are devices used to protect circuits on a circuit board from each other. They consist of a transmitter and a receiver which are optically isolated. The MOC3061SM is used in applications where high voltage or high current levels can be hazardous or where there is a need for increased reliability in the electrical connection between circuits.The MOC3061SM operates using an LED (Light Emitting Diode) and a photo-sensitive Triac. The LED is on the input side of the circuit and is used to detect changes in current or voltage. This signal is then transmitted optically to the Triac, which is on the output side of the circuit. The Triac switches on or off as instructed by the LED on the input side of the circuit.The device is designed to be used in low-voltage, high-current applications. It is designed to operate in a range from 70V – 400V with a maximum load current up to 150mA. The MOC3061SM can operate as a switch for circuit control at frequencies up to 75 kHz, switch on-off, or perform many other applications where a protected interface between circuits is needed.The MOC3061SM is especially useful in low-voltage and high-current circuits that require isolation when operating at high speeds. Some applications that can benefit from the MOC3061SM include; motor controls, power switching modules, lighting controllers, AC motor drives, SMPS (switch mode power supplies) etc.The working principle of the MOC3061SM is based on pairing a light-emitting diode with a photo-sensitive triac. The LED is controlled by an input current, when this input current passes through the LED, light is emitted which is transmitted through an optical channel to the photo-sensitive Triac. The Triac in turn passes current to the output, thus allowing the signal to be transmitted without a physical connection.The main advantage of the MOC3061SM is it’s high isolation voltage, which can be as high as 4000VAC. This eliminates the need for physical isolation of the connected circuits, reducing costs and increasing reliability. The MOC3061SM also provides a high speed of switching, up to 75KHz, decreasing system start-up times and increasing efficiency.In conclusion, the MOC3061SM is a type of optoisolator with Triac, SCR output. It provides high speed isolation and control between circuits, allowing for a reliable and efficient connection at a high level of isolation. It is ideal for low-voltage, high- current circuits requiring isolation when operating at high speeds, and can be used in applications such as motor control, power switching, lighting control and AC motor drives.

The specific data is subject to PDF, and the above content is for reference