MOC3010TM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are types of self-powered, optoelectronic devices used to provide electrical insulation between the input circuit and the output circuit. The optoisolator – most typically a Triac, SCR Output – is MOC3010TM, a 6-pin optocoupler built by Fairchild Semiconductor.

MOC3010TM has a wide range of applications in digital and analog control, drive circuit protection, power loss detection and over-temperature protection. Its output uses a MOSFET and an included gain element, making it capable of driving a Triac or SCR for a wide range of applications.

This optocoupler provides an electrical barrier between the isolated (or controlled) side and the controlling side. This alone can prevent unexpected voltage from being sent from the output side back to the input side of the circuit. The device can also detect over-current and over-temperature conditions, protecting devices connected from damage due to these circumstances.

The operating principle of MOC3010TM is based on the Transfer Coupled Transistor-Transistor (Pseudo-phototransistor) Logic (TCTTL) methodology. The optocoupler contains a light emitting diode (LED) that is optically coupled to a photo-transistor. This combination of LED and phototransistor is then connected to an integrated circuit designed to control the output side of the circuit. The integrated circuit is activated when the light emitting diode is illuminated.

When power is supplied to the optocoupler, current flows through the LED, causing it to emit light. This causes electrons to be released from the phototransistor, creating a voltage on the output side of the circuit. This voltage can then be used to drive a Triac, SCR or other device, as required.

In addition to providing electrical insulation and drive potential, the MOC3010TM can also detect over-current and over-temperature conditions in the circuit. The output is disconnected if such conditions are detected, thus protecting the external device from being damaged due to a fault.

The MOC3010TM optocoupler is a versatile device capable of providing electrical isolation, drive potential, and over-current and over-temperature protection. Its low cost and ease of use make it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference