MOC3063FVM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MOC3063FVM is an opto-isolator based device belonging to the Triac, SCR Output category. It comes with a Zero Crossing (ZC) Triac driver output and is used to interface logic control to AC power. It is a six-pin DIP package device and contains an Allegro Microsystems Inc. proprietary creepage and clearance design which provides for maximum safety and immunity from electrical disturbances.

MOC3063FVM is used to transfer signals from low-power AC logic circuits to high-power AC loads such as resistive heating elements, motors and semiconductor light-dimming systems. It accomplishes this by sensing the ZC from the power line and providing logic circuitry to control the power signal until the next ZC occurs, isolating the two stages without using relays. It has a wide operating temperature range of -40°C to +85°C and features an on-state voltage drop of 1.4 V at 5 A and an off-state leakage current of 0.25mA max.

The working principle of the MOC3063FVM is as follows: A photocoupler is used to provide a digital signal isolation between the AC power line and the control circuit. A pair of infrared LEDs (Light Emitting Diodes) is used to interface the control circuit to the power triac. Thus, it is possible to drive high-power devices directly from the logic input.

To operate the MOC3063FVM, an AC sine wave is applied to its input. The Zero Crossing (ZC) detector section is enabled when the ac voltage is greater than the on-state detection voltage (8 V typical). The ZC detector output is then used to trigger the driver portion which switches on the triac. When the input voltage reaches 0V, the driver portion switches off and the triac is released. This enables the MOC3063FVM to control the AC signal between reference points, creating a stable output.

The MOC3063FVM is most commonly used in motor control, light dimmers, home automation, medical equipment, AC power control systems, and industrial automation applications. It is ideal for systems requiring full control of AC power and for situations where the use of complicated relays and phase control circuits are not practical or reliable.

In summary, the MOC3063FVM is a Zero Crossing (ZC) Triac driver opto-isolator which enables the control of an AC load from a logic signal. It is a useful tool for interfacing logic control to AC power, as it isolates the two stages without the need for relays. It is most often used in motor control, light dimmers, home automation, and medical applications.

The specific data is subject to PDF, and the above content is for reference