MOC3063S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MOC3063S is an optocoupler with a Triac and a Silicon Controlled Rectifier (SCR) output. The optocoupler serves to electrically isolate the input circuit from the output circuit while still allowing the output circuit to be controlled by the input circuit. This allows the output circuit to be switched based on the conditions of the input side circuit, without needing to be connected by physical wiring. The MOC3063S contains a Triac and SCR, which are components used for controlling alternating current (AC) on the output side.

The most common application of the MOC3063S is in power supply devices, such as dimmers and motor speed controllers. In these applications, the MOC3063S is used to control AC power to the device, allowing the user to adjust the amount of power applied. This is done by controlling the firing angle of the Triac, meaning that the Triac is turned on and off at different points in the alternating current waveform. By controlling the firing angle, the total amount of power traversing the circuit can be regulated.

The working principle of the MOC3063S is relatively straightforward. A LED on the input side of the device is connected to a DC voltage source. This LED is turned on and off in response to the voltage level provided to it. The LED shines light on an integrated photodiode on the output side of the device. This photodiode is coupled to an SCR and Triac, effectively coupling the light of the LED to the firing circuit. When the LED turns on, the photodiode generates an electric signal which causes the SCR and Triac to turn on, allowing power to flow from the output side of the device. When the LED turns off, the SCR and Triac turn off, blocking the flow of power. The firing angle of the Triac is controlled by the duty cycle of the LED, meaning that the ratio of LED on time to LED off time determines the average power level of the output circuit.

In conclusion, the MOC3063S is an optocoupler with a Triac and SCR output. It is used to control the firing angle of AC devices, thereby allowing users to adjust the amount of power applied. The working principle is based on the connections of the LED and photodiode, which are used to couple the input signal to the output circuit.

The specific data is subject to PDF, and the above content is for reference