MP2317GJ-Z Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MP2317GJ-Z is an integrated voltage regulator equipped with DC/DC converters, and it is classified as a switching regulator from the larger genre of DC/DC Voltage Regulators. This type of voltage regulator is well-suited for applications that require tight control over output voltage and noise filtering. Furthermore, its relatively thin architecture and high current rating makes it ideal for applications that require efficient power conversion with low device form factor.

The MP2317GJ-Z features a Synchronous buck-boost architecture, in which two switching transistors work in step to control the output voltage. One important benefit of this arrangement is that the device is able to change its configuration depending on its input voltage. In other words, it is able to switch between buck and boost modes in order to provide an optimal solution for different input voltages. Additionally, this type scheme generates less switching noise compared to its single-ended counterpart.

The MP2317GJ-Z is an ideal choice for applications such as hand-held electronics, personal computers, gaming systems, tablets and other battery-operated consumer electronics. It is capable of delivering up to 3A peak current with an output voltage in the range of 4.5V to 16V. It provides additional features such as over-temperature protection, output range auto-switching, over-voltage protection and over-current protection, which make it well-suited for various consumer electronics applications.

In order to operate the MP2317GJ-Z, the user must program the output voltage using an external resistor network. The resistor network is composed of two resistors connected in series, with one end connected to the VIN pin and the other end connected to the ground. The ratio of the two resistors determines the output voltage value, according to the following equation: Vout=Vref*(R1+R2)/R2. For example, if Vref is 2V and R1 is 24Kohm and R2 is 5Kohm, then Vout=2*(24Kohm+5Kohm)/5Kohm=8.8V.

The MP2317GJ-Z also features an adjustable soft-start circuit that allows the user to program the rate at which the output voltage ramps up. The soft-start circuit is enabled by connecting an external capacitor to the CSS pin. The value of the capacitor, in combination with two internal resistors, determines the rate at which the device will ramp up its output voltage.

In addition, the MP2317GJ-Z is equipped with a current limit function that prevents the device from exceeding its rated current. This effect is accomplished by setting the ILIM pin to a low voltage. If the output current exceeds the set maximum, the device will pull the CE pin to a low voltage and enter a current limit mode. This will reduce the device\'s current consumption and protect the device from overloading.

Overall, the MP2317GJ-Z switching regulator is a great choice for applications that require efficient power conversion with low profile form factor. It is equipped with a range of features that make it ideal for a variety of consumer electronics applications. It is capable of providing stable output voltage level, as well as efficient and reliable power conversion. Furthermore, its adjustable soft-start circuit and current limit function help prevent the device from becoming over-taxed when exposed to high current loads.

The specific data is subject to PDF, and the above content is for reference