MP2319GJ-Z Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management Integrated circuits) are used to stabilize and regulate power in an electronic system. Voltage regulators, a type of PMIC, convert the voltage of a power source to the desired output with a regulated voltage. The DC DC switching regulator is a type of voltage regulator that increases the efficiency and resilience of the system by using pulse width modulation to convert the input voltage to the output voltage without relying on a linear transformation. This enables the device to store energy and transfer it quickly, meaning it can be used in high frequency applications. The MP2319GJ-Z is one such regulator, and has found a variety of applications within the tech industry.

The MP2319GJ-Z is a synchronous step-down regulator that operates from a 4.5 to 28V input voltage range. Its wide input range makes the device suitable for many applications, from automotive to consumer electronics. The output voltage range is 0.6V to 19.4V, with a maximum output current of 5A. The device is designed for high efficiency and features a maximum switch voltage drop of 350mV, allowing it to reach 95% efficiency without ever needing inductor adjustment. Additionally, the device supports EN/SD pin control, which allows it to select burst or pulse-skip mode to maximize efficiency under light load conditions.

The MP2319GJ-Z has a few advanced features that can be used to improve its safety, ease of use, and efficiency. The high-side and low-side NFETs are integrated into the IC to reduce power loss, while the on-chip current-sensing resistor reduces external components and the REFIN port allows a low-noise reference voltage for better line and load regulation. The device also features short circuit, overtemperature, overcurrent, undervoltage, and overvoltage protections, as well as voltage tracking and output voltage margining.

The MP2319GJ-Z can be used for a variety of applications such as RF modules, industrial battery-based automotive systems, and processors for advanced mobile applications. It is suitable for specific types of applications that require high efficiency, reliability, and wide input voltage ranges. Additionally, the on-chip protection features combine with the extremely high efficiency to make it an ideal choice for high power and always-on applications. It can be used as a standalone regulator or with a microcontroller to optimize the efficiency and power savings of the system.

The primary application of the MP2319GJ-Z is to provide a regulated voltage output while minimizing power loss and maximizing efficiency. This is accomplished by using pulse width modulation (PWM) to convert the input voltage to the desired output voltage. The device determines the width of the pulses by comparing the output voltage to a reference voltage. When the output voltage is higher than the reference, the pulses are made shorter, and vice versa. During this process, the device pulls in energy from the input by charging an external inductor, then discharges it to the output capacitor. This process is repeated and the input and output voltages are maintained close to the same level.

In conclusion, the MP2319GJ-Z is a synchronous, step-down DC-DC switching regulator with a wide input voltage range and an output current of up to 5A. Its advanced features make it suitable for a variety of applications, from RF modules to industrial battery-based automotive systems. The device uses pulse width modulation to convert the input voltage to the desired output voltage with excellent efficiency, making it ideal for high power and always-on applications. The on-chip protection features, wide input voltage range, and high efficiency all make the MP2319GJ-Z an attractive choice for any power management application.

The specific data is subject to PDF, and the above content is for reference