MP38870DL-LF-P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC switching regulators provide an efficient solution for converting DC voltage to either a higher or lower voltage. The regulators control the output voltage using a PWM (Pulse Width Modulation) control scheme. The MP38870DL-LF-P is a one-chip synchronous Step-Down Switching Regulator that functions as a DC-to-DC converter. It provides both high efficiency and low output noise and features a unique Pulse Modulation (PM) technique in order to reduce the amount of inductor ripple current.

The MP38870DL-LF-P is an ultra-compact buck regulator IC, designed to efficiently convert a wide input voltage range of 4.5V to 24V into a lower output voltage with a switch mode operation. It consists of an internal high-side and low-side MOSFET, internal frequency control, a power Fail circuit, and adjust for an output voltage with two resistors. It also comes with integrated soft-start with a fast turn-on time of 20us and a power good flag which indicates the output voltage is stable.

The MP38870DL-LF-P’s circuit architecture (PM) allows a dynamically optimized output current ripple under light-load conditions and utilizes synchronous rectification to achieve high efficiency over a wide load range. This device also features a selectable external-capacitor-esr or multiplier-based soft-start capabilities and a wide range of protections such as OCP, OVP and thermal shutdown.

The main features of the MP38870DL-LF-P switching regulator are an adjustable output voltage range between 0.8V and 3.3V, a maximum output current of 5A, an operating frequency of 250kHz to 2MHz, short-circuit protection, adjustable soft-start and adjustable input voltage range from 4.5V to 24V. It provides excellent efficiency and dynamic response with low EMI operation for a wide range of applications such as data acquisition, automotive and automotive infotainment, industrial, consumer and computing.

The working principle of the MP38870DL-LF-P switching regulator involves converting a DC input voltage (Vin) to a designated output voltage (Vout). The input voltage is compared with the output voltage, and the difference is used to drive the MOSFET switch, which in turn drives the inductor. The output voltage and current are monitored and regulated through the use of feedback loops and pulsewidth modulation control.

The MP38870DL-LF-P switching regulator is a low-cost and efficient solution for applications requiring a low output voltage and is used in numerous applications such as automotive and automotive infotainment, consumer, medical, industrial, and computer systems. Its high efficiency, low output noise, and high current handling capabilities make it ideal for small-to-medium-sized power supplies. Its ability to switch between both a high and low voltage range makes it an attractive choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference