Series:	Kool-Pak®MP900
Packaging:	Tube
Part Status:	Active
Resistance:	1 kOhms
Tolerance:	±1%
Power (Watts):	30W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	-20/ +80ppm/°C
Operating Temperature:	-55°C ~ 150°C
Package / Case:	TO-220-2
Supplier Device Package:	TO-220
Size / Dimension:	0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max):	0.650" (16.52mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

MP930-1.00K-1% application field and working principle

Through hole resistors are resistors that pass through holes and are soldered directly to the printed circuit board (PCB). Such resistors are used to adjust electrical signals in a circuit, such as voltage, current and signal frequencies. The MP930-1.00K-1% resistor is a through hole resistors that has an electrical resistance of 1.00K ohms and a tolerance of 1% which means that the actual resistance can fluctuate within 1%. This type of resistor is typically used for applications requiring higher precision and accuracy than standard through hole resistors. They are commonly used in power supplies, circuit noise reduction, audio filtering and DC amplification. The MP930-1.00K-1% resistor is typically available in 1206, 2010 and 2512 package sizes. The working principle of a through hole resistor is simple. It consists of a small insulating material such as ceramic or glass, and a metal strip such as copper or nickel that is laminated between two layers of the insulator. When electricity passes through the metal strip, a portion of the electrical energy is converted into heat, forming resistance. The resistance value of a through hole resistor is determined by the length, width and thickness of the metal strip and the material used in the insulating material. Depending on the application, the resistance value of a through hole resistor can range from 0.001 ohm to 10 megohms. Since through hole resistors come in a wide range of different sizes, they can be used in a variety of applications. They are also relatively easy to install, as they simply need to be soldered onto the PCB. This makes them ideal for prototyping and small production runs. In conclusion, the MP930-1.00K-1% through hole resistor is a relatively high-precision and accurate component. It is typically used in power supplies, circuit noise reduction, audio filtering and DC amplification applications. Its working principle is quite simple, as it uses a combination of a metal strip and an insulator to convert electrical energy into heat.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description