MP930-0.20-1%

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of electronic component used to resist the flow of electric current. They are also referred to as a resistor, or sometimes a resistor network. They are used as the building blocks of electrical circuits and are designed to dissipate the excess heat generated during the flow of current. A variety of resistors are available for different applications and the most common types are wirewound, thin film, and chip resistors. While these three types of resistors are used for different applications, each type is also used for various applications.One such type of resistor is the MP930-0.20-1%. This type of resistor has a power rating of 0.20 Watt, meaning it can handle currents up to 100mA, depending on the application. This type of resistor is considered a Through Hole Resistor, and is usually represented by the letter “R” in a schematic or circuit diagram. This type of resistor is typically used in applications such as switching, coupling, buffering, and current limiting for a variety of electronic equipment and devices.The MP930-0.20-1% Through Hole Resistor is constructed using a carbon film, which is made up of a thin film of carbon composite material. This material is used for its ability to dissipate heat quickly and evenly, as well as for its ability to resist corrosion. The resistor is attached to the circuit board using a solder and heat process, which is then protected by an epoxy coating to help protect it from environmental and physical stresses.The resistance value of the MP930-0.20-1% through hole resistor is typically made up of four numbers. The first two numbers (930) are the resistance value, which represent the total resistance of the device. This is usually specified as Ohms. The last two numbers (0.20) represent the tolerance of the resistor, which is the acceptable variation of resistance that the resistor can have from its nominal value. This is usually specified either as a percentage or as a decimal.The working principle of the resistor is simple. When current passes through it, the resistor will experience a voltage drop that is proportional to its resistance. This voltage drop is naturally dissipated as heat, which is then taken away by the heat sink. It is important to ensure that the correct type of heat sink is used, as the accurate and efficient operation of the resistor is dependant on having the correct type of heat sink. In addition, it is important to make sure that the resistor is not overloaded, as this can lead to the resistor becoming too hot, which can cause it to fail and potentially cause damage to the circuit.Overall, the MP930-0.20-1% Through Hole Resistor is an important element in any circuit, and its design and application should be carefully considered to ensure that it is used correctly and safely. It is typically used in applications such as switching, coupling, buffering, and current limiting, and its resistance and tolerance should be carefully chosen to ensure that it is able to handle the current and voltages that are passed through it.

The specific data is subject to PDF, and the above content is for reference