MP930-50.0-1%

Series:	Kool-Pak®MP900
Packaging:	Tube
Part Status:	Active
Resistance:	50 Ohms
Tolerance:	±1%
Power (Watts):	30W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	-20/ +80ppm/°C
Operating Temperature:	-55°C ~ 150°C
Package / Case:	TO-220-2
Supplier Device Package:	TO-220
Size / Dimension:	0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max):	0.650" (16.52mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>Through Hole Resistors are widely used in electronic circuits to create resistance and can perform a variety of functions depending on the particular application. The most common type of Through Hole Resistor is the MP930-50.0-1%. This type of resistor is designed to provide accurate resistance in a wide range of circuit designs and is used in a variety of applications.</p><p>An MP930-50.0-1% Through Hole Resistor has a power rating of 50 watts and a temperature coefficient of 1.2 x 10^-6 per degree Celsius. It carries a maximum voltage rating of 500 volts, and a minimum voltage rating of 15 volts. The resistor also has a tolerance of 1%, meaning that it will provide accurate resistance within 1% of the value printed on the resistor’s body.</p><p>The most common application of Through Hole Resistors is in analog circuits, such as amplifiers and filters. These circuits require accurate and precise resistances, and the MP930-50.0-1% can provide that. The resistor can also be used in other circuits, such as rectifier circuits, current regulators, and voltage dividers. It is also commonly used in motor control circuits, power supplies, and other miscellaneous applications.</p><p>The working principle of a Through Hole Resistor is relatively simple. The resistor acts as a conductor, through which electricity is passed from one element of the circuit to another. The amount of current that passes through the resistor is dependent on the amount of resistance it has, and this resistance is determined by the type of material the resistor is made of.</p><p> The resistance of the MP930-50.0-1% is created by a combination of a conductive material and a ceramic resistive material. The ceramic resistive material is responsible for providing the majority of the resistance, and the conductive material is used to provide a small amount of additional resistance. Together, these materials create the resistance printed on the resistor’s body.</p><p>Through Hole Resistors are an important part of many electronic circuits, and the MP930-50.0-1% is a versatile and reliable part that can be used in a variety of applications. This highly accurate resistor is designed to withstand high temperatures, and is ideal for use in high-power circuits.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description