MP930-75.0-1%

Series:	Kool-Pak®MP900
Packaging:	Tube
Part Status:	Active
Resistance:	75 Ohms
Tolerance:	±1%
Power (Watts):	30W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	-20/ +80ppm/°C
Operating Temperature:	-55°C ~ 150°C
Package / Case:	TO-220-2
Supplier Device Package:	TO-220
Size / Dimension:	0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max):	0.650" (16.52mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor, also known as a "through-the-wall" resistor, is a type of component used to provide resistance in an electrical circuit. It is designed to be connected directly to a printed circuit board (PCB) or other device following a specific layout. The MP930-75.0-1% resistor has been widely used for various applications due to its cost-effectiveness, reliability, and precision.

Applications

The MP930-75.0-1% resistor is typically used in telecommunications, medical, industrial, automation, and consumer electronics. It is also commonly used in audio, video, home entertainment, and networking applications. The through hole resistor can be found in power supplies, amplifiers, power transistors, audio filters, digital control, and motor controllers. In telecommunications, MP930-75.0-1% resistor is often used in radio frequency (RF) circuits. It is used for impedance matching, providing filtering, and isolating reception and transmission paths. It is also used for signal conditioning, providing smoothing, and ensuring linearity. In medical applications, the MP930-75.0-1% resistor is used for providing resistance to prevent overloading in medical equipment. It is also used for controlling electric current and voltage in medical equipment, such as cardiac defibrillators. The MP930-75.0-1% resistor is commonly used in industrial automation. It is used for monitoring, amplifying, and providing feedback control in servo motor control and material handling, as well as process control applications.In consumer electronics, the MP930-75.0-1% resistor is used for controlling current and voltage in audio and video applications as well as in computer hardware. It is also used for providing impedance matching in computer, television, and radio circuits, as well as in audio equipment.

Working Principle

The MP930-75.0-1% resistor works on the principle of Ohm\'s law, which states that the current flowing through a conductor is directly proportional to the potential difference between two points in a circuit. The resistor is designed to control the current flow through a circuit by providing resistance to the electric current. When an electric current goes through the MP930-75.0-1% resistor, a certain amount of energy is lost due to the resistance of the component. This energy is converted to heat, which dissipates from the resistor into the surrounding air, providing cooling and preventing overload or damage to the circuit. In addition to controlling current, the MP930-75.0-1% resistor also stabilizes power supply output voltage. When a sudden change in the load occurs, the resistor will absorb the extra power and prevent it from damaging the circuit. The MP930-75.0-1% resistor has a wide range of applications and is the most reliable and cost-effective type of resistor for use in electrical circuits. Its use ensures reliable performance and provides stability in power supplies, amplifiers, and motor controllers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description