
Allicdata Part #: | MP9486GN-ND |
Manufacturer Part#: |
MP9486GN |
Price: | $ 1.32 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Monolithic Power Systems Inc. |
Short Description: | 100V INPUT, 1A, STEP-DOWN CONVER |
More Detail: | Switching Regulator IC Output |
DataSheet: | ![]() |
Quantity: | 1000 |
100 +: | $ 1.20487 |
Series: | * |
Packaging: | Tube |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The MP9486GN is a DC-DC switching regulator. It is used to regulate voltage between two voltage rails by switching current or power between the two. It is a multi-function regulator that includes both current and voltage regulation. It is also capable of handling a wide range of loads, as well as being capable of operating at extremely low voltages.
The MP9486GN is mainly used in application fields such as notebook computers, automotive electronics, digital camera and game consoles. It can provide up to 4A output and can support a wide variety of input voltages ranging from 1.8V to 5V. It is also capable of providing up to 8A of short circuit current and up to 6A peak current.
The MP9486GN works on the basic principle of Pulse width modulation (PWM). Basically, it converts a DC input voltage into a higher voltage by switching a current on and off at a certain frequency and with a specific duty cycle. This is done by controlling the switching transistor with the PWM and therefore, regulating the output voltage. The pulse width modulation is done by the internal controller and it can be adjusted in 4 different steps in order to achieve the desired output voltage.
The MP9486GN is also capable of providing over-voltage and over-temperature protection to enhance the robustness of the regulator and prevent it from any type of damage. It also includes soft start circuitry to reduce in-rush current and noise levels, as well as a power good signal to indicate a stable output voltage.
The MP9486GN is a high-efficiency, low-power, and cost-effective DC-DC switching regulator. Its wide range of applications and low power requirements make it an ideal choice for a variety of applications. Its flexibility, features, and ease of use make it a reliable and cost-effective solution for regulating voltage between two voltage rails.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MP9486AGN | Monolithic P... | 1.32 $ | 1000 | 100V INPUT, 3.5A, SWITCHI... |
MP9442GJ-Z | Monolithic P... | -- | 1000 | HIGH EFFICIENCY 2A, 36V, ... |
MP9447GL-P | Monolithic P... | 1.93 $ | 1000 | IC REG BUCK ADJ 5A SYNCBu... |
MP9485GN-Z | Monolithic P... | -- | 1000 | 100V INPUT, 500MA, STEP-D... |
MP9486AGN-Z | Monolithic P... | -- | 1000 | 100V INPUT, 3.5A, SWITCHI... |
MP9486GN-Z | Monolithic P... | 0.8 $ | 8542 | 100V INPUT, 1A, STEP-DOWN... |
QBL8YG60D-MP94 | QT Brightek ... | 0.67 $ | 498 | LED 5MM BI-LVL RA GREEN D... |
MP9447GL-Z | Monolithic P... | -- | 1000 | IC REG BUCK ADJ 5A SYNCBu... |
MP9473GL-P | Monolithic P... | 1.67 $ | 1000 | HIGH-EFFICIENCY, FAST-TRA... |
MP9442GJ-P | Monolithic P... | 1.17 $ | 1000 | HIGH EFFICIENCY 2A, 36V, ... |
MP9457GF-Z | Monolithic P... | -- | 2500 | 3A, 4.5V-55V INPUT, FREQU... |
MP9457GF | Monolithic P... | 2.11 $ | 75 | 3A, 4.5V-55V INPUT, FREQU... |
MP9486GN | Monolithic P... | 1.32 $ | 1000 | 100V INPUT, 1A, STEP-DOWN... |
MP9485GN | Monolithic P... | 1.23 $ | 1000 | 100V INPUT, 500MA, STEP-D... |
MP9473GL-Z | Monolithic P... | -- | 1000 | HIGH-EFFICIENCY, FAST-TRA... |
MP9488GS | Monolithic P... | 1.25 $ | 1000 | 450V, 300MA, WIDE INPUT, ... |
MP9488GS-Z | Monolithic P... | -- | 1000 | 450V, 300MA, WIDE INPUT, ... |
IC REG BUCK 5V 1A 24-SOICBuck Switching ...

IC REG BUCK 1.375V 0.6A SOT23Buck Switch...

IC REG BUCK 12V 1A TO263-7Buck Switching...

IC REG MULTI CONFIG 15V 3A TO220Boost, F...

IC REG BUCK 12V 8A TO-220FLBuck Switchin...

IC REG SWITCHD CAP RATIO SOT23Charge Pum...
