MQ1N8147 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS Diodes, such as the MQ1N8147, are used to protect sensitive electronic components from voltage surges or spikes. They are designed for use in applications where a sudden current spike or voltage overshoot must be reliably arrested. TVS diodes are commonly used in telecommunications, automotive, audio/video and other consumer electronics applications, where reliability and fast response are critical.

In general, a TVS diode looks like a traditional diode, but with a higher breakdown voltage and current handling capacity. The MQ1N8147 is a glass-passivated silicon avalanche diode with an ultra-low capacitance and ultralow leakage current. It has a working voltage of 5.3V and a peak surge current of 1500A.

The working principle of the MQ1N8147 is that most of the time the diode is in non-conducting mode, but when the voltage crosses the breakdown threshold, it operates as a low resistance switch, clamping the voltage at the declared level. This prevents the voltage from exceeding the circuit’s design voltage, thus protecting the circuit from voltage overloads. This clamping voltage is sustained until the current decay below a certain level.

It is important to note that TVS diodes are not designed to be substitutes for fuses. They provide a better protect protection as they respond to very short transients. Fuses, on the other hand, are designed to respond to sustained over current and operate over prolonged time periods. The MQ1N8147 is designed to protect circuits from transients caused by lightning, electrical surges, electrostatic discharge, etc.

These diodes also help improve system reliability in conditions where it is exposed to extreme temperatures and humidity levels. The MQ1N8147 is integrated with an ultra-flat internal body, which allows for a more low-profile design with an improved thermal and mechanical stability. It also supports lead-to-lead mounting with a wide array of surface mount reflow options and multi-assembly.

TVS diodes are typically used in a circuit as a shunt element, connected in parallel to the equipment or the component to be protected. This shunt element is designed to carry the current, shunting it away from the sensitive components, leaving them unharmed in the event of a voltage spike or surge.

It is important to understand that the MQ1N8147 should only be used to protect circuits from transients. They are not appropriate for suppressing continuous over-voltages or overloads. They should be used as a last line of defense and the device must be properly designed in order to ensure adequate protection.

In conclusion, the MQ1N8147 is a glass-passivated silicon avalanche diode that is commonly used for protecting sensitive electronic components from voltage surges or spikes. It operates with a working voltage of 5.3V and a peak surge current of 1500A. It can be mounted in various reflow options and comes with an ultra-flat internal body for improved thermal and mechanical stability. It is important to understand that it should only be used as a last line of defense for providing protection from sudden high voltages or current spikes.

The specific data is subject to PDF, and the above content is for reference