MS22 50004-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush Current Limiters (ICL) such as MS22 50004-B are electronic components which are used to restrict the maximum amount of current to flow in an electrical circuit while it is being energized. They are designed to keep the current drawn by capacitive or inductive components at startup within safe limits without tripping the circuit breaker. They are widely used in power plants, electrical systems and other applications where large capacitive or inductive loads can cause overloads to the circuit.

Overview of MS22 50004-B

The MS22 50004-B is an inrush current limiter designed to provide reliable current limiting up to 10 arms when used in conjunction with a suitable motor drive or other drive device. It features an adjustable current limit setting of up to 50 A and a voltage limit range of 380 VAC to 440 VAC. The component features automatic thermal protection, ensuring that it turns itself off when the temperature in the circuit gets too high. It also features a fast response time and is designed for use with variable frequency drives.

Application Fields

The MS22 50004-B is ideal for use in many applications, including power plants, motors, inverters, UPS systems, start-up of electrical systems, welding applications, rectifiers and automotive equipment. In the case of power plants, the component helps to ensure that the start-up current is kept within safe limits and does not overload the system. It is also used in motors to reduce the start-up current and prevent any overloading of the system. In inverters and UPS systems, it helps to limit the starting current and prevents any overloading from occurring.

Working Principle of MS22 50004-B

The MS22 50004-B limiters feature a metal oxide varistor (MOV) in the form of a disk. This MOV is designed to provide an adjustable current limit to dissipate any overcurrent that may occur when a high-capacity load is connected to the circuit. When an overcurrent develops, the MOV dissipates the excess energy into the circuit as heat, thus limiting the amount of current that flows into the components. In this way, the current is limited and kept within the desired range.

The working principle of the MS22 50004-B is designed to provide both overcurrent protection and voltage protection. The current limit is set by adjusting the voltage applied to the MOV. The voltage limit is also adjustable, depending on the type of load that is connected to the circuit. When this limit is exceeded, the MOV will begin to dissipate the excess energy into the circuit, thus preventing any further damage.

Conclusion

The MS22 50004-B is an inrush current limiter which is designed for use with high-capacity loads and motor drives. This limiter helps to protect electrical circuits by limiting the current that is drawn and preventing overloads and short circuits. Its metal-oxide varistor absorbs any excess current and dissipates it as heat, thus ensuring that the circuit is only subjected to the amount of current that is required. This makes the MS22 50004-B an ideal component for applications where oversized loads can cause circuit overloading and cause damage to components.

The specific data is subject to PDF, and the above content is for reference