MS22T1-C22-4080-VSM-2-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

COBs, which stands for Chip On Board, are light emitting diode (LED) components that enable lighting products with excellent efficacy and more luminous flux. The MS22T1-C22-4080-VSM-2-00 is one of those COBs. This article will discuss the applications and working principles of the MS22T1-C22-4080-VSM-2-00.

Applications of MS22T1-C22-4080-VSM-2-00

The MS22T1-C22-4080-VSM-2-00 is a cost-effective product suitable for various lighting applications, such as advertising light, decorative lighting, industrial lighting, stage lighting, etc. It is widely used in LED street, LED wall washers and LED flood lights. This LED component is often found in spotlights, downlights, and task lights. Thanks to its superior thermal performance, MS22T1-C22-4080-VSM-2-00 is also widely used in high power applications that require more than 160-lumen per watt.

Working principle of MS22T1-C22-4080-VSM-2-00

The MS22T1-C22-4080-VSM-2-00 consists of several light-emitting diodes mounted on a single substrate. These light-emitting diodes are connected to each other in a series arrangement, and the amount of current supplied to each diode increases as it travels across the dies. The diode’s characteristics determine the amount of light that is emitted. The light emitted by MS22T1-C22-4080-VSM-2-00 is of superior quality due to the careful selection of materials used. The optical and electrical characteristics closely match those of traditional luminaires.

The MS22T1-C22-4080-VSM-2-00 uses a two-pin connector to connect the diode to the power supply. It has a wide operating voltage of 90V-305V, which is suitable for most residential and commercial lighting applications. The thermal management of the device is very good as it can be mounted directly onto the heat sink. This ensures that the operating temperature remains at a relatively low level, resulting in a longer lifespan for the LED.

The MS22T1-C22-4080-VSM-2-00 requires very little power to generate high levels of output. The device has a highly efficient thermal dissipation system that allows it to reach its maximum output without additional cooling. This makes it suitable for a variety of applications, such as street lighting, wall washers, and floodlights. It also provides superior light uniformity and has a wide angle power range to maximize penetration in hard-to-reach illumination areas.

Conclusion

The MS22T1-C22-4080-VSM-2-00 is a cost-effective LED light source capable of providing superior light output at competitive power levels. This LED component is suitable for numerous different lighting applications and is often used in LED street, LED wall washers and LED flood lights. Its superior thermal performance ensures optimal efficiency and a long life. Its two-pin connector and wide operating voltage enables easy and safe installation. The light emitted by the MS22T1-C22-4080-VSM-2-00 is of superior quality due to the careful selection of materials used, providing superior light uniformity.

The specific data is subject to PDF, and the above content is for reference