MSDM200-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are capacitive devices used in direct current (DC) applications. They are composed of four or more diodes which are arranged in a bridge configuration. The bridge rectifier converts alternating current (AC) to DC and is used in power supplies and other built circuits to provide DC output. A typical application of the bridge rectifier is converting AC to DC in DC motor control operations.

The MSDM200-18 is a bridge rectifier with a rating of 200 Amps and a forward voltage drop of 18 volts. It is a ceramic-housed semiconductor device that offers the highest efficiency and reliability for a wide range of AC Moto applications. The MSDM200-18 uses two center-tapped electrodes to convert AC to DC, allowing for faster switching action and reduced noise levels.

The MSDM200-18 contains four diodes, one each in the top and bottom left of the bridge and one each in the top and bottom right of the bridge. Each diode has an anode on the left and a cathode on the right. The left and right electrode of the iode are center-tapped and attach to the power supply. The anodes of the two are connected to the positive of the power supply, and the cathodes to the negative.

The working principle of the MSDM200-18 is based on how a bridge rectifier works. When alternating current is applied to the center-tapped electrodes, and the left and right electrodes are connected to opposite rails of the power supply, the diodes will conduct. When the current changes direction, the diode previously in a forward-biased direction will become reverse-biased, and the diode that was previously reverse-biased will become forward-biased. This creates a continuous unidirectional current flow in the output.

The MSDM200-18 also boasts improved efficiency and harmonics reduction, utilising parallel capacitance to provide very low output ripple. This is achieved by utilising two separate diodes to deploy a pulse-width modulation and active rectification solution. The bridge rectifier is able to maintain a fixed voltage and current output due to its ability to reduce the power supply\'s switching frequency while monitoring the current output. This allows the bridge rectifier to automatically adjust the on/off ratio of the power supply to maintain a constant current.

The MSDM200-18 also utilizes a built-in surge protection feature to prevent overload damage, and includes high-temperature, low-impedance heat-spread layers to regulate and spread the heat generated during operation, providing a long-term delicate heat dissipation for improved performance and greater reliability.

The MSDM200-18 is a perfect choice for those looking for an efficient, reliable and cost-effective bridge rectifier for their AC Moto applications. Its high efficiency and low-noise operation coupled with its surge protection feature and improved thermal design ensures it will work under maximum load conditions with minimum noise.

The specific data is subject to PDF, and the above content is for reference