MSDM75-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are widely used in commercial and industrial applications within the electrical engineering industry. The type of rectifier being discussed in this article is the MSDM75-18 device. This particular device consists of four individual diodes connected in either a half-wave or full-wave configuration. The MSDM75-18 rectifier is a popular choice for a variety of applications, ranging from rectifying alternating current for AC-DC power supplies or DC motor drives, to voltage and current conversion.

A half-wave rectifier circuit typically consists of an AC source with a single diode connected in series. When a positive voltage is applied to the diode, electron current flows in the circuit, while no current flows when a negative voltage is applied. A full-wave rectifier circuit comprises two separate diodes connected in opposite directions, with the AC voltage applied across both of them. This allows electron flow through both diodes, allowing current to flow in either direction. The MSDM75-18 rectifier is a bridge rectifier, which provides a full-wave rectification in 4-pin configuration and allows DC to be obtained from a single phase supply.

The primary benefit of using a bridge rectifier is the ability to convert any AC voltage. A full-wave rectifier circuit can convert mains AC voltage down to a safe 12V DC, or easily convert three-phase power to an appropriate DC level. Other advantages include increased circuit efficiency, as a bridge rectifier eliminates the need for a center-tap transformer, and improved surge protection from symmetric rectification. In many AC-DC power supply devices, MSDM75-18 rectifiers are used to provide a high-density, low-cost alternative.

When compared to other available full-wave rectifier solutions, the MSDM75-18 rectifier is well-suited for applications requiring low voltages. This device has a reverse junction breakdown of 75V, with a leakage current of less than 5 mA at any voltage. It is also capable of a peak forward surge current of 8.6A, with a reverse voltage of 1000V. In terms of heat dissipation, the junction-to-ambient thermal resistance is 17 K/W, while its package weight is just 2.2 grams.

The MSDM75-18 rectifier is designed for operating under standard room temperatures. The operating temperature range is 0-75°C and up to 100°C in certain conditions. This device is rated for power dissipation at up to 1W and is suitable for use in both AC and DC circuits. Additionally, its four-pin configuration can be used to provide superior power generation and rectification performance while its cost-effectiveness makes it an ideal choice for many commercial and industrial applications.

The MSDM75-18 rectifier is a bridge rectifier device capable of providing full-wave rectification in a 4-pin configuration from a single-phase power source. It is an ideal choice for low voltage applications such as AC-DC power supplies, DC motor drives, and voltage and current conversion. This device is extremely cost-effective, with a reverse junction voltage breakdown of 75V, peak forward surge current of 8.6A, and reverse voltage of 1000V. Additionally, it has a junction-to-ambient thermal resistance of 17K/W and is rated for power dissipation at up to 1W. With its high performance and low cost, the MSDM75-18 rectifier is one of the most popular solutions today for use in a wide variety of commercial and industrial applications.

The specific data is subject to PDF, and the above content is for reference